Learning the basics of torch welding is the first step in becoming proficient with many types of welding.However, mastering welding is something that can take time, not because of its difficulty, but because there are many nuances involved with maneuvering the torch.There are many different types of materials that can be welded.You will be ready to apply the process to a variety of projects once you have mastered the oxygen flow and tip size on a torch.These tips can be used to learn how to torch weld.
Step 1: Put on protective clothing, including long pants and shirt.
Step 2: There is no flammable materials in the open space.
Step 3: The fuel adjustment knob needs to be turned.
The shorter of the 2 tanks on the torch has a knob on it.To release the gas, turn the knob slowly.
Step 4: The torch should be lit.
Slowly light the torch if the fuel is trapped in the spark cup.
Step 5: The flame size should be adjusted.
Once you have the size flame you need, open the oxygen valve a little bit at a time.Blue edges will be defined by a steady flame.
Step 6: The material needs to be cleaned.
Check the material you are welding for.If you want the material to be free of dirt or debris, you have to clean it.
Step 7: The flame should be applied to your weld.
Carefully move the torch over the area to be welded after adjusting your flame.If you want to see your results, move at an even pace.You will create holes in the material if you hold the flame too long.The piece will not melt if there is not enough application.Move your torch in short runs to make sure you get the result you need.Pay attention to the angle of the torch and the amount of flame.