There is an alternative to natural silk rugs.There are different ways in which these carpets differ from silk rugs.Specific care is required to keep the rug's fibers clean.You can clean even the dirtiest viscose rug if you follow the techniques correctly.
Step 1: To get to the nap, run your hand along the rug.
The natural direction of the rug's fibers is the nap or pile.You can see how the rug's fibers lay by running your hand across the surface.The rug's fibers can be loosened by being against the pile.
Step 2: In the direction of the nap, push a carpet sweeper.
The fibers in a viscose rug can be damaged by high power vacuum cleaners and vacuums.Instead, use a non-electrical rug or carpet sweeper and run it along the direction of the rug's nap or pile.The crumbs and dirt should be removed from the rug.If the rug is still dirty, you can go over it several times.An inexpensive carpet sweeper can be found at many stores.You can use a soft broom if you don't have a carpet sweeper.It's important to keep in mind that viscose isn't a strong material.If you put it in a high traffic area, it won't hold up.Don't scrub very hard when you need to clean it.
Step 3: You can sweep the fringes with a broom.
If you want to remove the fringes from the rug, do not use a carpet sweeper or vacuum.The dirt and debris from the fringes should be brushed with a broom or brush.Dustpans can be used to collect and dispose of leftover dust.
Step 4: To clean spills, use a mild dish soap.
The dish soap should be tested on a small part of the rug.Don't use it if you see staining or discoloration.Mild dish soap and water is a good way to clean a larger area.Rub the rag in the direction of the nap after Saturate it with cold water and a drop of pH neutral dish soap.When you're done, wipe the area with a dry rag.detergents can stain and alter the color of your rug, so do not use them.
Step 5: Spot clean with a mixture of water and dish soap.
Cleaning spills as soon as possible will cut down on the size and severity of the stain.Spot cleaning tough stains can be done with a mixture of water, white vinegar, and mild dish soap.If you want to skim the bubbles on the top of the solution, use a rag.To remove the solution from the stain, use the rag with the bubbles on it to wipe it down.If you oversaturate the rag in the solution, it will damage your rug.A citric acid solution can be used to treat stains.You might want to use a specialized solution that won't yellow your viscose since water can do that.After you spot clean the rug, you can use a fabric softener to keep it soft.When using fabric softener, put it in a spray bottle and add water.It's a good idea to spray fabric softener onto the rug.Next, use a soft bristle brush to groom the rug, brushing it in the direction of the grain.
Step 6: Limit the number of times you clean your rug.
It can get damaged if it is a weak material.When the rug is dirty, use a machine to clean it.It's best to keep the rug clean so you don't have to deep clean it.
Step 7: The carpet should be secured to the floor or a flat surface.
Put the carpet on a mounting board to keep it from moving as you clean it.A mounting board can be purchased at most rug stores.
Step 8: Rent or buy a carpet cleaning machine.
At major home improvement or department stores, you can rent or purchase a carpet cleaning machine.The machines have a hose and cleaning nozzle that can be used to clean your carpet.It's a good idea to rent a machine that uses cold water.
Step 9: To make a cleaning solution, mix carpet cleaning chemicals with water.
Online or at rug stores, you can find anionic detergents for viscose rugs.Read the instructions on the back of the cleaning chemicals you purchase.After mixing the cleaning chemicals with cold water in a bucket, transfer the solution to the basin in your carpet cleaning machine.The hot water can shrink the rug.When you're done combining the chemicals, make sure to mix them together.
Step 10: The machine that cleans the carpet has a head.
The cleaning solution needs to be ejected from the carpet cleaning machine.If you go with the nap, you won't cause any harm to the rug.There should be some dirt in the rug.You don't want to shrink your rug if you get a carpet cleaner that can wash rugs with cold water.
Step 11: The solution should be vacuumed up by the carpet cleaner.
When you run the carpet cleaner from one end of the rug to the other, go down the same path, but only with the vacuum running.This will remove the dirty water and dirt from your carpet.
Step 12: The entire carpet needs to be cleaned.
Continue up and down the carpet with the cleaning solution and carpet cleaner until the entire carpet is cleaned.
Step 13: To dry the carpet, hang it.
To dry the carpet, hang it on a railing.If you apply heat to the carpet, you could damage it.
Step 14: If your carpet is in poor condition, you should have it professionally cleaned.
The rugs are very fragile and can be easily destroyed.If you own a rug that is important to you, it is a good idea to have it professionally cleaned.This will make sure that your rug isn't damaged.Your carpet will be cleaned by a professional carpet cleaner.
Step 15: As soon as they happen, blotting spills.
To clean a spill, use a rag or paper towel.The quicker you can remove stains, the less time they will have to enter the carpet.You may push the liquid deeper into the carpet if you rub or agitate the stain.
Step 16: You should keep your rug out of damp places.
It is easy to destroy viscose rugs that have been exposed to dampness for a long time.The basement, bathroom, or outside are places where they could be exposed to a lot of water.