All about buying used tanning beds - what to look for and how to find one.
A first time buyer may be confused by shopping for a used tanning bed.Buying a used tanning bed can save you a lot of money if you know what to look out for.The used tanning bed buyer's guide will give you the confidence that you know what to look for.Why buy a used tanning bed?You can save a lot of money if you purchase a used tanning bed or booth.If you know what to look for, you can find a good bed for less than the original price of a new bed.
You can save a lot of money if you purchase a used tanning bed or booth.If you know what to look for, you can find a good bed for less than the original price of a new bed.
Most tanning beds have an "Hour counter".Pull up the hour display if the bed has an hour counter.The hour counter will tell you how many hours the bed was used.With still low use, tanning beds and tanning booths with a few hundred hours would be considered.Getting a bed with a few hundred hours is a great deal because most tanning lamps are rated for 1,000 hours or more.
The number of hours the tanning lamps were used was very important.Take a close look at the tanning lamps.Check to see the brand of tanning lamps, are the lamps original to the bed, or are they an off- brand?Check to see if the lamps are working correctly.If the hours are low, you will have plenty of tanning power left because most tanning lamps are rated for 1,000 hours or more.
It is important that the tanning beds are in good condition and that they have been taken care of because they are very expensive.Poor care can damage the acrylics and make them brittle and brittle, which can cause a safety issue.If the previous owners used a harsh cleaner on the tanning bed, it will cause the acrylics to stop the UV light from penetrating through them and this will cut down on tanning power of the bed.They can be scratched.A safe cleaner will help prevent this.The best way to prolong the use of the acrylics is to use a proper cleaner.If the previous owners used an improper cleaner you might want to replace them.
The tanning bed or booth needs to be inspected.Check to see if the plastic cover is in good shape.The bed has been stored by the previous owners.Was the area clean and dry?Is it in a garage or a house?A bed that is clean and dry will be a better performer.
It's important to have the proper electrical requirements for tanning beds.The tanning bed or booth may have electrical issues if the previous owners did not have the proper electrical.
There is a local service area for Rockton, Loves Park, and Machesney Park.