The result of dedicated focus, patience, a steady hand, and a great deal of thinking, is impossible bottles.The article will show you how to put the items in the bottle.
Step 1: Pick up the plastic wrapper and throw it.
Step 2: Take the cards out.
Step 3: Attach the sticker to the blowdryer.
It will come off easily.
Step 4: If you want to flatten the box, use a blow dryer or hobby knife to slice open the bottom seam.
Step 5: Place the box into the bottle and unflatten it.
Reseal the bottom seam with glue using a bent piece of wire or other appropriate tool.If you want to get strong glue in the right place, use some craft glue and be patient.
Step 6: You should insert one card at a time.
Step 7: To make it stick, close the box and heat the sticker.
If it doesn't get sticky enough, use more glue.
Step 8: Put the ball in the fuzzy area so that the hole doesn't rip out too much of the fuzz and comb it back over it later.
Step 9: Put the ball in a vice, squeeze the air out of it.
Step 10: Place a bike pump needle in the hole.
Step 11: Put the ball into the bottle.
Step 12: The bottle needs to be turned upside down so the needle can poke out the neck.
Attach the flexible hose on the end to the bike pump.
Step 13: Pull the needle out of the ball after it has been inflated.
Step 14: Put a drop or two of paint over the hole by combing over it with fuzz.
The hole in the ball can be sealed with strong glue if it re-inflates itself, then you can pierce the hole with a skewer once the bottle is in.
Step 15: Put the cube in all 27 parts.
Step 16: Attach the cube to the bottle.
You will need a 3 and a quarter inch inner diameter to fit the cube together.It will be helpful to have long-handled tools to apply force, as you will need to poke each cube into place.