The Phillips website says the HQ8 is now replaced by this SH50 blade. There are less negative comments about the newer blade.
Are Norelco HQ8 and hq9 interchangeable?
They do interchange. I just put HQ9s in a Norelco Aquatech, which came with the HQ8 blades. I've been putting hq9 blades in my hq8 razor for a few years.
What is the difference between SH90 62 and SH90 72?
The SH90/72 has a different retaining ring than the SH90/62. I like it better as there are less parts to keep stored. It is light blue in color as compared to orange in the SH90/62. Additionally, one does not need the installation tool to remove or install as it can be easily done with one's fingers.
What is the difference between SH90 52 and SH90 62?
What is the difference between these (sh90/62) and the sh90/52 heads? Answer: The SH90/62 heads are upgrades to the older SH90/52 heads. Improvements were made to the original heads, resulting in the SH90/62 upgraded replacements.
How do you change the blade on a Philips Norelco 3000?
- Step 1 Philips Norelco Shaver Head Blade.
- Grasp the sides of the head and pull straight up to detach it from the body.
- To unlock, rotate the center locking mechanism counter-clockwise.
- Lift the locking mechanism straight up, freeing the blades.
- Carefully push the blades out from behind.
How do you change the head on a Philips Norelco?
- Pull the shaving head holder off the body of the shaving unit.
- Twist the retaining rings inside your shaving head holder and pull them out one by one.
- Remove the shaving heads from the shaving head holder.
- Each shaving head consists of a cutter and a guard.
How do you open a Norelco shaver?
- Step 1 Casing.
- Turn the shaver so that it is facing you.
- Remove the two 10.1 mm screws inside the shaver head using a T8 Torx screwdriver.
- Lift the shaver head off of the casing.
- Gently pull the black and blue casing apart using a metal spudger.
- Pry the remaining casing open using a metal spudger.
- Step 7 Battery.
How do you change the blades on a Philips Norelco 5000 Series?
https://www.youtube.com/watch?v=p6-CR9kjNiE
Are all Norelco shaver heads the same?
There is no one answer to this question as there are a lot of different kinds of Norelco shaver heads and trimmer blades. I'll go through a few different kinds and hopefully you find your in the list so you know roughly how long it will last.
How do I replace Norelco heads?
https://www.youtube.com/watch?v=PgPsqjb8OrA
How do I know which Norelco shaver I have?
Answer. You can find the model number on the backside of the shaver. You can find the serial number on the backside of the shaver or under the pop-up trimmer or in the hair chamber.
Is SH50 the same as HQ8?
HQ8 has been replaced by SH50.
How do you reset a Norelco razor?
To reset the shaver, press and hold the on/off button for more than 5 seconds. After replacing the shaving heads, you can reset the replacement reminder by pressing the on/off button for more than 7 seconds. Otherwise, the replacement trigger will turn off automatically after 9 successive shaves.Oct 4, 2021
How do I know if my Norelco is charging?
The charging indicator on your device will start flashing to indicate that the groomer is charging. Once the groomer is fully charged, the charging indicator lights up continuously for approximately 30 minutes and then automatically turns off to save energy.
Why does my razor turn orange?
When razor blades are exposed to moisture for extended amounts of time, oxidation occurs. This causes rust to form on the metal. Most people toss their razors out once rust forms, but you can actually remove that rust and use your razor blades safely for much longer.