The OE designs of the front sway bar end link in the 2000-2010 Focus' are not serviceable-meaning they cannot be greased. Since they are not serviceable they are prone to premature wear due to intrusion.
Do stabilizer bars give problems?
When the bushings become torn, worn out or completely break, the stabilizer bar itself will become unstable and cause a rattling or clunking sound while you are driving. The noise will get progressively louder when you steer the car in either direction or when you are driving on a rough road.Jan 12, 2016
Do stabilizer bar links go bad?
This vital suspension component is made from steel or iron rods, so it doesn't often break. However, the sway bar contains bushings and links that can deteriorate over time. That's why it's important to understand the signs of a bad sway bar, so you can replace these essential components for more on-road safety.Sep 9, 2021
Does stabilizer bar affect steering?
Since the stabilizer bar links are attached to the lower control arm, steering and handling are also negatively impacted when they begin to wear out. ... The steering wheel will appear to be "loose", and the body will sway from left to right more due to the fact that the stabilizer bar links and bushings are wearing out.Jan 12, 2016
How do I know if my stabilizer bar links are bad?
Warning signs of a broken or bad sway bar link include clunks and squeaks. Over-steering or excessive lean through turns are also symptoms of worn sway bar links, but they can also be signs of larger problems with your vehicle's suspension system.
Do sway bar links make a difference?
The answer is no, however your mechanic may recommend replacing both sway bar links because both links usually wear at the same rate and if one is bad, the other may go soon too. ... There is no need to replace a sway bar link if it's working properly and is not worn out. Replacing a sway bar link is not very expensive.