Baking soda can be used to clean battery terminals, how do you do it?
Popping the hood of your car can be dangerous.Many people don't do it because they miss some basic problems that can be solved at home.There is a battery terminal example.The battery terminals can cause problems if they are not cleaned.Baking soda can be used to clean your car battery terminals.
Popping the hood of your car can be dangerous.Many people don't do it because they miss some basic problems that can be solved at home.There is a battery terminal example.The battery terminals can cause problems if they are not cleaned.Baking soda can be used to clean your car battery terminals.
The battery terminal can be found on the hood of your car.As you stand in front of the car, it is usually to your right.
If the wires are connected with screws or bolts, remove them from the battery using a screwdriver or wrench.The negative wire should be removed first followed by the positive.
Put a toothbrush in the baking soda paste and scrub the wire heads.The connection to the battery will be most affected by the insides of the "O" ring, so be sure to clean them.
Before you remove the wires, scrub the battery connection pegs.It's important that your paste isn't too thin.You don't want water on your battery.Once you apply it, you want it to stay in place.
The battery connection wire heads should be wiped off with a wet cloth or towel.
The battery connection wires should be dry for at least 15 or 20 minutes.Don't connect the wires while they are wet.The purpose of cleaning them will be defeated by this.