It is easy to stained wood floors and furniture.Untreated wood has a higher chance of getting deeper stains because they don't have the protection wood with finish has.There are ways to remove blood stains from wood.
Step 1: Baking soda can be put on the blood stain.
Step 2: The brush needs to be soaked in white vinegar.
Step 3: The brush can be used to gently rub the stained area.
Step 4: To clean the area, use a dry clean cloth.
Use bleach if the stain is still visible.If you have dark wood, use bleach cautiously.
Step 5: Remove the brush from the stained area by soaking it in bleach.
Step 6: Use a damp cloth to wash the area.
Step 7: Dry the wood with a towel or cloth.
Step 8: To remove excess blood, use a clean cloth.
Step 9: To make a detergent solution, mix 1/2 of liquid dish-washing detergent with 1 cup of cold water in a small bowl.
Step 10: The cloth needs to be dipped in the detergent solution.
Step 11: To remove the blood stain, wipe the area with the cloth.
Step 12: Use a damp cloth to rinse the area.
Step 13: Dry the wood with a towel or cloth.
The blood stain can still be seen.
Step 14: If the stain is not gone, you can dip the steel wool in liquid wax.
Step 15: Rub the area lightly with steel wool.
The steel wool should only be used to remove the fine layer of wood.
Step 16: To clean the surface, use a soft cloth.
Step 17: If needed, wax or polish the surface.
Step 18: To clean the blood, use a damp sponge.
Step 19: The sponge should be washed.
When all the blood is gone, repeat the wiping process.
Step 20: To remove blood stains, rinse the area thoroughly with a damp cloth.
Step 21: Use a towel or cloth to dry the wood.
Step 22: To buff the area, use a cloth moistened with mineral spirits.
This should be done lightly.
Step 23: To clean the area, use a cloth.
If the blood stain is not gone, use a steel wool.
Step 24: Rub the stained area with a steel wool moistened with mineral spirits.
Rub along the grain of the wood.You have to remove as much finish as you can.
Step 25: To clean the surface, use a soft cloth.
Step 26: If necessary,finish the affected area after 24 hours.