Bosch washing machine transit bolts removal guide series 4

The drum could damage the machine's walls and damage itself if it weren't for the bolts being used for transportation.In washing machines, if TV transport bolts are not needed, then they are no longer needed.The TV is enough to pack in a box, wrapped in styrofoam, but what to do with a washing machine that has a drum inside it, which can damage the cargo during transportation?

The washing machine has a drum in it.This creates huge risks, but transportation can't be avoided, so fixing the drum bolts is a way out of this situation.There is a device that protects the inside of the machine.

Knowledge of the need for transport bolts can always be useful, as transport costs often have to be incurred.

Transport bolts are used for temporary fastening of parts in order to avoid damage during transportation.The transport bolts are used to fix the washing machine.What makes such a fixation?The safety of the drum and the machine body is dependent on two factors.

There is a carving and a hexagonal hat on the bolt.The bolts look like the standard.There are two washers that are needed so that the bolt doesn't damage the machine.There is a plastic cylinder present.The drum needs to be fixed in the given position.

Any piece of transportation is at risk of being broken.In a quiet state, the drum of the washing machine does not touch the inner walls, but it is worth starting the transportation process, as such a collision danger will arise.The breakdown of a new purchased item is the most undesirable outcome.Transport bolts are required.

If the washing machine is going to be transported alone, or if the equipment is already purchased, you need to look at the rear wall, where the bolts will vary from three to five in the case.There are no exceptions.A small candy machine can be placed under the sink.You need to remove the cover to find them.

The thread is screwed into the bolt that was installed in the hole.Bolt has washers, metal, and plastic that do not scratch the body structure.

The instructions are mandatory with a washing machine.It is attached to all brands.If you ignore the instructions and don't remove the bolts, the machine will break and you will not get any compensation.Not having bolts will cause noise, shocks, and other problems.

The washing and spinning processes will be disrupted if the transport bolts are not removed.

It will lead to breakdown of the whole mechanism due to the effects of shocks and displacements.

Unbolted bolts can cause parts to suffer.You need a wrench to remove the bolts.It's about ten to the mark.Some models have different sizes.

Candy is somewhat different with the machine.To remove the mounts, you need to do something.The cover has screws on it.Remove the cover by removing the mounting bolts.There are protective foam inserts.The cover needs to be screwed back after the operations.Transport bolts should be saved as they may be needed in the future when transporting the same washing machine.

The owner of a washing machine can use a wrench to help remove the transport bolt, since the size of the key is not yet known.A sticker with all the necessary information is placed on the box for the washing machines.There is a foam plastic inside the box.The machine is protected from external and internal damage.

Transport bolts are installed when loading a washing machine.They can be found on the back of the machine.A wrench and plastic valves are attached to the transport bolts.You can face unpleasant consequences if you forget about the transport bolts, such as the noise of the drum, the knocking inside the machine, or the jumping of a washing machine.

Transport bolts are also called transport locks because Bosch's washing machines have them.Everything is detailed in the machine's instruction.

The bolts on the top of the washing machine are plastic inserts with a special shape.

The manufacturers of the washing machine give advice on the need to leave the latches in order to use them in the future.It is possible to invite a Bosch specialist to the house if it is impossible to remove the fixing bolts.He will do the work quickly and qualitatively.

To avoid unpleasant consequences for the new washing machine, it is necessary to read the instructions carefully.The washing machine will definitely serve reliably and for a long time, thanks to the instructions made carefully and without haste.