Unless the turntable you have just bought has a phono pre-amp built in. ... If that's the case plug the turntable into a spare input, like the auxiliary or "aux" ports. Don't plug it into a "phono'' input or you may blow your speakers up.28 jun 2017
Can you plug a turntable into aux?
Simply plug the turntable's audio signal cable into one of the receiver's analog audio inputs. These inputs are oftentimes labeled Aux (auxiliary), Line In, Analog In, etc. You can even use your receiver's "CD" or "Tape" input, if needed. No other connections are required.
Does phono mean aux?
This frequency correcting curve was added to preamps and so a phono (meaning phonograph) input can't be used for a normal signal. An AUX input is a normal (unequalised, or flat) input for connecting other equipment to the amplifier. It may use a phono (as in RCA) connector, or more typically now a 3.5mm jack.
What's the difference between phono and aux?
Your phono stage restores them. If you've ever plugged a turntable into a line level input, you've heard how quiet and “tinny” the sound was. Your AUX, or auxiliary input can be used for any other source component: CD, tape, tuner, iPod, whatever. Anything with a line level output can be plugged into it.
Is line better than phono?
For most mainstream cartridges (and turntables) the PHONO signal level will be around 5 mV. So a LINE signal is from 50 to 1500 times stronger than a PHONO signal.
What is line in on record player?
Answer: Setting up your Audio-Technica turntable properly will ensure that you get the most out of your listening experience. The PHONO/LINE switch turns the turntable's internal RIAA preamp off/on, thus providing the correct equalization for your turntable's current setup.
Are turntables line or phono?
A turntable produces a PHONO output signal. This phono signal needs to be converted to a LINE LEVEL signal (sometimes referred to as AUX signal) to work with audio equipment including stereo systems, computers, and speakers. A phono preamp converts PHONO to LINE LEVEL.