Can you hide Xfinity box behind TV?

Where do Cables go for wall-mounted TV?

Your TV cords run through the plastic tube. The top outlet has a power plug. This is where you plug in the TV. The kit has a power cable that you need to then plug into an existing wall electrical outlet that is low on the wall.Feb 9, 2015

Can you mount cable box to back of TV?

If you have some space between the wall and the TV, attach the cable box to the back of the TV with cable ties. This is possible if the back of your TV or its mounting bracket has some places to thread the cable ties through. You could also use adhesive hanging strips to attach the cable box to the wall behind the TV.

Can I hide my cable box and still use a remote?

Will My Remote Work (if I hide my cable box)? If your remote uses Bluetooth or RF technology, you don't have much to worry about as these don't require line of sight. As long as you're within range of your cable box, your remote should work fine.Sep 7, 2016

What do you do with the cable box when you mount a TV on the wall?

All you need is to put the cable box behind the TV and ask a friend to change channels. You can mount one side into a stud if it is possible. Make sure no to drill a pilot hole when you mount the stud. For creating holes into a stud you need to use a mounting screw since the 3/16″ drill bit seems too large.

How can I hide my cable box and wires behind my TV?

- Use Cord Clips to Hide Your Wires Behind a TV Stand. - Use Zip Ties to Keep Your Wires from Touching the Floor. - Use a Cable Management Box. - Use a Wall Cord Raceway Kit. - Hide Your TV Wires Inside a Baseboard Raceway. - Use a Fabric Cord Concealer.

How do I hide cable box and use remote?

https://www.youtube.com/watch?v=fi3xnlZIOs8

Does cable box need to be visible?

Many cable boxes use IR / Infrared which is a strong signal that can bounce off of walls, like a laser pointer. Line of sight is not required as long as there are semi-reflective surfaces (i.e. walls) near the cable box.Oct 1, 2015

Do remotes work through cabinet doors?

There are two types of remote controls: infrared (IR) or radio frequency (RF). RF remotes don't need a clear path to the component. The radio waves can penetrate walls and cabinet doors. RF remotes are expensive, and few stereos or video components use them.

Can you hide Xfinity box behind TV?

If you have an Xfinity X1 main TV Box or Player, you can use the XR2/XR5 remote control with Aim Anywhere control (RF capability) even if they are stored in a closet or another room, up to 50 feet away. To avoid this, disconnect the IR Extender from the TV Box when you're not using it.

Related Posts:

  1. How to shorten a light cord without cutting it is by Hammer Addict.
  2. How to change the volume of a soundbar with a TV remote
  3. There are three functions on the garage door remote.
  4. How to drill into a metal stud?