You don't realize how valuable your keys are until you lose them.They are your ticket to mobility and if they are not around, you are stuck.There are many ways to replace a car key if you find yourself in a bind.Replacing car keys can be expensive, but not all.
Step 1: Write down your car's serial number.
It is necessary to find someone who will help you replace the key.In most cars, the VIN is located on the driver's side dashboard and can be seen through the window, but it can also be found on a rear wheel well or the front of the engine block.You can check the number on your car insurance information if you don't know where your vehicle's vin is.It should be on the left side of the page.A number is a letter.The letters I, O and Q are not in the same place as the numbers 1 and 0.This only works after 1981There were no VIN numbers before 1954.
Step 2: Write down the year, make, and model of your car.
You will need to find this information if you want to get a new set of car keys.This information will let you know the type of key you need to open your vehicle.Keys are supposed to be unique.
Step 3: Call a locksmith.
This should be your first choice.They will usually give you the best deal on a new key, about half as much as it would cost to get one from your manufacturer or dealer.They don't charge to visit the car.They will open your car and make you a new key.While hardware stores aren't usually equipped to create new car keys, locksmiths have more sophisticated machinery.A locksmith will be able to help you with a replacement key if your vehicle is older.A good locksmith can help you make a new one if you lost a key.Your manual may have instructions on how to reprogram the replacement key, so they should be able to do that.If you own a vehicle, be sure to bring any other key fobs with you, as they may not work until the new key is programmed.Some cars need specialized equipment to program keys.
Step 4: You can find discounted replacement keys online.
Sometimes after market keys and even factory replacements can be found online for less than it would cost to get them directly from the manufacturer.You may have success with a dealer on eBay, but you should look for companies that can replace car keys.The simpler the key, the easier it will be to replace.It's a good place to start.Some cars need specialized equipment to cut and program.Call around to see who would be willing to cut the key for you before you buy it.The cost of a whole new one from the locksmith should be compared with the programming charges.
Step 5: Check to see if key replacement is covered by your car insurance.
The manufacturer or distributor might not be able to replace the key for a high-end vehicle.You may be able to get a discount through your warranty.Bring your car's information, a valid photo ID, and any other sets of keys to the dealership.Hope for the best!
Step 6: You can visit your locksmith.
Depending on the sophistication of your car key, you may be able to have a new electronic key programmed by a locksmith.Many new car keys have a chip in them.If you have a key with a transponder in it, you can get a new one at a locksmith for $50.00 - $120.00 depending on your car and your area.The car won't start if the wrong key is in the ignition.Locksmiths have transponder keys.
Step 7: Buy a new car key.
You can find a lot of replacement electronic car keys on the internet.You can get a new car key for 75 percent less than the dealer would charge.Before you buy anything, be sure to check prices for it in your area, as you still need to get it cut and programmed.
Step 8: Your dealer will give you a new set of keys.
This will cost you a lot of money.If you just want a key that you know will work and you want to get it quickly and easily, this is not a bad option.If it's a Honda, you should visit your local dealer, if it is a Ford, go to the Ford dealership.
Step 9: Put the new key in your car.
Sometimes you can program them on your own.Your owner's manual will be very helpful in this situation because the instructions are usually included with the new key.Reprogramming usually involves opening and closing the doors and turning the lights on and off.The buttons are like a code.
Step 10: Wait a second.
Extreme heat or cold weather can cause your electric key to malfunction.The sweat can cause issues if you go on a run with your key in hand.Before you pay to replace your key, let it rest for a while.It could come back to life.
Step 11: All your keys should be reset.
After a change or repair to your car's electrical systems, a key fob may stop working.If you don't find the owner's manual for your car, you can try to find one online.
Step 12: The battery needs to be replaced.
If you notice that your key isn't working as well as it could be the battery is dying.A replacement battery is usually inexpensive and can be found online at an auto-locksmith or electronics store.Make sure you have the make, model, year, and VIN number of the car.Most batteries are easy to replace.You need to remove the old battery and put in the new one.Voila!If the manufacturer charges for labor when they install the new battery, this may be more expensive than going straight to the dealer.If battery replacement is covered, check your car's warranty.
Step 13: The key should be reprogrammed.
If you don't want to do this on your own, you can get help from locksmiths or even the car dealership, but the simplest solution is usually to follow the instructions in your owner's manual.Normally the reset involves pressing a series of buttons in a certain order, but it is different for every car.You should check your owners manual.