The rich appearance of cork flooring is due to its variety of interesting colors and texture.The same way as tile or wood, cork flooring is easy to maintain.cork is a renewable, natural material, which makes it an added benefit.A small investment of time spent cleaning and caring for the cork floor will pay off over time.
Step 1: It's a good idea to sweep regularly.
Use a broom, a dust mop, or a vacuum cleaner with a soft brush attachment.Depending on how much you use the area, repeat 2 times a week or whenever you notice it getting dusty.If you wait too long, your cork floor may be damaged.Soft brush attachment can scratch the floor permanently, so never vacuum without one.
Step 2: A weekly mop with minimal water.
If you fill a bucket with warm water and white vinegar, you will get 1 gallon of water.Put a sponge mop or microfiber cloth in the bucket and wring it out.The floor can be harmed by standing puddles if the floor is wiped with enough mixture on the mop or cloth.
Step 3: Occasionally clean with stronger treatments.
Monthly or whenever your floor looks dirty, mop with a stronger solution.Mild cork-floor or wood- floor detergent can be used instead of vinegar.If it leaves a mark, you can use another mild, pH-neutral cleaner.If you use dish soap or another sudsy cleaner, be aware that it can leave a soapy film on the floor.
Step 4: It is important to wipe up spills as soon as possible.
As soon as spills occur on your cork floor, use an absorbent towel or soft cloth.Don't allow water to stay on the cork floor.cork is a type of wood flooring that will absorb water if it isn't removed.If the spill has caused a stain, use the solution described above.If necessary, look for a specialized cork floor cleaning product.
Step 5: The deep clean should be done.
Rent a floor machine and wool disks for an extremely dirty floor that hasn't been properly maintained.After cleaning, apply the finish.Liquid solvent wax can be used to clean the floor.If this doesn't work, use a buffer with sheep's wool disks and another application of wax.
Step 6: The sunlight should be reduced.
It is advisable to protect cork floors from bright sunlight.Use curtains, drapes, window tint, blinds, or other window treatments to block strong light.
Step 7: It's a good idea to prevent the furniture from getting scratched.
To allow for easy movement and distribute weight, the place felt pads under all heavy pieces of furniture.There is a protective mat under office chairs.
Step 8: Mat near entrances and sinks.
Breathable mats made of natural fibers can be used to collect dirt.Don't use mats with rubber or other non-porous backings.It's a good idea to wipe your feet every time you enter.
Step 9: Protect your floor from the elements.
cork floors may crack when they get wet.If you spill water on the floor, wipe it up.Don't put items on the floor that could make it wet.If you have house plants, put trays or basins underneath them to catch any overflows or leaks from the pot.
Step 10: As the sealant on the floor wears down, apply it again.
The pre-treated tiles will wear down eventually.If possible, use a sealant recommended by the manufacturer or one that specifically mentions cork on the label.This is a water-based finish.You can use hard wax oil, but it is more work to apply and last less time.To apply polyurethane, gently abrade the floor and roll on the finish using a foam roller.It should be left untouched for 48 hours.If you get conflicting advice, follow the instructions on the finish label.Chemicals on the floor may harm the cork.Stick with the same finish each time.A home can get between 1.5 and 2 years from wax or a polyurethane finish.Every few months the cork floors in busy public buildings need to be sealed.