Cost to Refinish Hardwood Floors (2021) is a calculator.
The average cost for refinishing hardwood floors is between $2 and $6 per square foot.The cost of refinishing hardwood stairs is between $25 and $85 per step.There is a cost to buff and recoat hardwood floors.It costs $600 to $1,100 to redo wood floors yourself.
You can get free estimates from contractors near you.
Without staining, a professional hardwood floor refinishing costs between $1.50 and $5.00 per square foot.The average cost for wood floors is $2 to $7 per square foot.The cost of refinishing hardwood stairs is between $25 and $85 per step.It costs $600 to $1,100 to redo wood floors.
Cost of hardwood floor refinishing depends on square footage, layout, location, staining, finish type, number of coats of finish, and local labor costs.The cost increases when furniture, carpet, or stairs are removed.
Sand, stain, and finish are the options for hardwood floor refinishing.
Sanding and refinishing hardwood floors can cost up to $5.00 per square foot.Sanding removes the old finish and the surface layer of the wood.After sanding, contractors apply a seal to the floor.
The cost of refinishing hardwood floors is between $0.50 and $2.00 per square foot.Sanding, staining, and refinishing wood floors cost between $2 and $7 per square foot.The wood color can be changed by staining.First, you need to apply two coats of stain, then add a clear finish.
Whitewashing hardwood floors costs $2 to $7 per square foot and requires sanding to remove the old finish and then applying a light wash and clear top coat instead of a darker stain.It's also known as whitewashing.
If the treads and risers are refinished, the cost is between $25 and $85 per step.Stairways with spindles are more expensive and take longer to sand.
The total cost for carpet removal and disposal is between $0.25 and $1.00 per square foot.The cost to remove carpet from stairs is between $7 and $10 per step.
In areas with a high cost of living, the prices for refinishing hardwood floors are higher than the national average.
It is cheaper to redo hardwood floors with alternative methods, but they do not remove deep scratches, stains, or discoloration.
$50 to $80 per hour is the average cost to hire a local handyman to polish hardwood floors.Floor polishing is an easy project that restores the wood's sheen without sanding but will not remove scratches or discoloration.
There is a cost to screen, buff, and recoat hardwood floors.Screening uses a buffing disc to remove the old finish from the wood.A new sheen is added to dull floors with the removal of minor scuffs and scratches on the surface.
Sandless floor refinishing can cost up to $4.00 per square foot.Sandless refinishing uses chemicals to etch the old finish off, followed by a tinted finish that hides scuff marks and restores the wood's color and sheen.Sandless methods don't work for floors with scratches, stains, or damage.
The average home has wood floors that cost $1,200 to $2,400.The total cost is the same for refinishing pine, bamboo, and parquet as it is for sanding or staining.
On average, refinishing engineered hardwood floors cost $2 to $6 per square foot.A solid hardwood wear layer is on top of engineered flooring.Depending on the wear layer's thickness, engineered floors can be sanded and refinished 1 to 5 times.
Oak, cherry, or pine floors can be refinishing for up to $7 per square foot without staining.The most common hardwood for flooring is oak.Extra care needs to be taken when sanding to prevent grooves or chatter marks on the wood.
Depending on the type of refinishing and whether or not repairs are needed, refinishing parquet floors can cost anywhere from $2 to $6 per square foot.The wood grain runs in several directions and requires special care from a professional.
The cost of refinishing bamboo floors is less than the cost to install new bamboo flooring.If the veneer layer is at least 2mm thick, bamboo floors can be sanded and refinished.
To reduce the chance of splinters, bamboo flooring should be sanded at an angle to the grain on the first pass.
Depending on the type and thickness, Bruce hardwood floors can be professionally sanded and refinished.The warranty is voided by sanding.
Pergo and laminate floors are not the same as solid hardwood.The top layer of veneer is too thin for sanding.
The average cost of refinishing a hardwood floor is $2 to $6 per square foot, which is cheaper than the cost to install new hardwood floors.
On average, refinishing hardwood floors and carpet installation cost between $2 and $8 per square foot.Depending on the wood flooring condition, refinishing the floors is cheaper than installing new carpet.
Equipment rental and supplies cost between $600 and $1,100.Without experience, refinishing floors can ruin hardwood floors.The replacement of individual planks or the entire floor may be required if sanding is not done correctly.
Renting a floor sander costs between $60 and $70 per day.The cost of renting an edger is $37 to $46 per day or $170 to $185 per week.Depending on the home's size, refinishing projects can take several days.
Look for weekend rates that are discounted.A drum sander can be rented for a fee on Saturday and returned on Monday.
A minimum of three passes is required to finish a hardwood floor.Without skipping a step, the floors will look rough.If you want to progress to the finest grit, start with the coarsest.
If the floor doesn't have a lot of flaws, start with 60 grit sandpaper followed by 80 and 100.
The surface layer of the hardwood floor needs to be sanded to remove the old finish.After sanding, contractors can add a stain to change the wood color, then apply a clear finish to seal and protect the floor.
Depending on the home's size, layout, finish type, and stain selected, refinishing a hardwood floor can take 2 to 6 days.Not including drying and curing time for the finish is what most contractors do.
Depending on thickness, species, and age, hardwood floors should be refinished every 7 to 10 years.When hardwood floors have damage, finishing is recommended.
Solid hardwood floors can be refinished up to 10 times.Thinner wood flooring can be found in homes built before the 1920s.If the floors are too thin to sand, screening and re coating is a better option.
If the contractor adds at least two coats of finish to the floor, it will not feel rough after refinishing.
It's not possible to properly refinish hardwood floors without sanding.Sanding removes the old finish.For floors with a dull sheen, consider screening and re coating.
Solid hardwood floors can be sanded and refinished like other hardwood floorings.
The ammonia in the wood is too deep and sanding removes less than 2mm of wood from the surface.Homeowners can choose a dark wood stain to cover the pet stains, or they can remove the urine-stained planks.
It's optional to remove the baseboards but it protects the trim from being nicked by the sanding equipment.If you leave baseboards in place, cover them with tape-backed foam to prevent them from being damaged.
Home Depot offers N-Hance hardwood floor resurfacing, which uses a screening and recoat technique instead of sanding, followed by a UV-light treatment to cure the finish quickly.It's best to use N-Hance on floors with minimal scratches.
Lowe's rents floor sanders for refinishing hardwood floors.
They always appreciate the gesture of tipping the floor.If the work quality exceeds your expectations, the standard tipping rate is $10 to $30 per person.Workers appreciate being able to use the bathroom throughout the day.