Most air conditioning units are equipped with a reset button. These buttons tend to be red and quite small. If you're having a tough time finding it, consult your owner's manual.
What does the reset button do on an air conditioner?
This typically happens after a power outage and is in place to prevent fires and explosions. A reset can also correct an AC that's only blowing warm air, even when the thermostat is set to “cool.” There are a handful of reasons your AC could be blowing warm air, but one of them is a general thermostat error.
How do I reset my carrier?
- Locate the "Reset" button on the air conditioner's control panel. ...
- Press and hold the "Reset" button down for 3 seconds and then release. ...
- Press and hold the "Reset" button down for another 3 seconds -- this time a light should flash on the display.
How do you reset the thermostat on a Carrier air conditioner?
- Press the "Left" button and hold. The "Accessory status" screen will appear. ...
- Press the "Scroll" button to select the accessory you want to reset.
- Press the "Right" button to reset the selected setting.
- Press the "Left" button to return to the normal display. references & resources.
Is there a reset button on AC thermostat?
Arrow Buttons – Normally, a thermostat has two arrow buttons for resetting the temperature higher or lower. If you adjust these, the new setting is temporary, only lasting until you have reached the end of the previously set program.
How do you reset Carrier Infinity unit?
- Hold the button next to the left arrow for several seconds until the "Accessory Status" screen appears on the display. ...
- Scroll through the accessories by pressing the "Scroll" button on the thermostat. ...
- Reset the setting by pressing the button next to the right arrow.
What do you do if your air conditioner wont turn on?
- Check your Thermostat. ...
- If your air filter is covered in dust, this is likely the problem. ...
- Look for a Blown Fuse/Tripped Circuit Breaker. ...
- See if the Emergency Shut-Off Switch Is OFF. ...
- Check the Inside Unit's Power Switch. ...
- Make Sure the Drain Pan & Lines Aren't Clogged. ...
- Look for a RESET Button.
What happens when you reset your air conditioner?
This typically happens after a power outage and is in place to prevent fires and explosions. A reset can also correct an AC that's only blowing warm air, even when the thermostat is set to “cool.” There are a handful of reasons your AC could be blowing warm air, but one of them is a general thermostat error.