Most washing machines come equipped with a lid switch. This switch is connected to a solenoid that completes a circuit, allowing the machine to run only if the top is down. However, some washing machines come with a lid lock.
Why do washing machines have a lid lock?
The door lock, also known as the interlock, is a safety mechanism used on front load washing machines and on some top load washers that prevents the door or lid from being opened while the machine is in operation.
Why isn't my washing machine lid locking?
My Washing Machine Lid Won't Lock If the door lock is defective, the washer door will not latch properly. The door lock can fail either mechanically or electrically. Inspect the door lock for damage. If the door lock is damaged or does not latch properly, replace it.
Do washing machines have child locks?
The Child-Lock function is a safety feature that protects children from accidentally getting hurt, when the washing machine is powered on. ... To enable the Child-Lock function, follow the steps below: 1 Press the Power button to go to an initial washing mode. You can start washing by pressing the Start/Pause button.
Will a washer work without a lid switch?
Most washing machines come equipped with a lid switch. ... This switch performs the same function, but the lid must be locked in place for the machine to wash. A simple bypass for the first type of lid switch is to simply jam a piece of wood into the switch, causing it to activate the solenoid.
How do you bypass the lid lock on a washing machine?
https://www.youtube.com/watch?v=RgoKHeJXCb8
How do you bypass the lock mechanism on a Whirlpool washer?
https://www.youtube.com/watch?v=XAnQ6Ovvnuc
Will washer work without lid lock?
NO. The lid lock it to prevent injury to the people near the washer, as without it stopping the machine, the agitator will turn with the lid open.Apr 11, 2017
How do I reset the lid lock on my washing machine?
If your lid lock light is flashing, you can unplug your washer for 10 minutes and plug it back in to reset the washer and the flashing light. You can also press and hold the 'End of Cycle' button for 20 seconds to reset the washer and flashing lid lock light.
How do I turn off the lid lock on my Whirlpool washer?
- Turn off the washer and unplug the appliance. ...
- Locate the retaining tabs and/or screws that hold the top horizontal panel down. ...
- Look for the lid lock switch on the underside of the top panel and where it fits into the appliance.
How do you bypass a magnetic lid switch?
https://www.youtube.com/watch?v=wqzfOmQdDoo
Do all top load washers lock?
Top loaders have no need to lock when they are running for the prevention of putting limbs in them while they are moving. The moment the lid is opened the lid switch is tripped which shuts the washer off.