Metalworking lathes are covered by OSHA 29 CFR 1910.212 and ANSI B11. ... According to 6.21 of ANSI B11. 6, manual lathes shall be safeguarded with a chuck guard and chip and coolant splash shields as required. Woodworking lathes are covered by OSHA 29 CFR 1910.213 and ANSI O1.
What machines always require guards?
- Guillotine cutters.
- Shears.
- Alligator shears.
- Power presses.
- Milling machines.
- Power saws.
- Jointers.
- Portable power tools.
What does a guard do on a lathe?
Use guards to protect from accidental contact with rotating parts. When the lathe spindle is set at too fast of an RPM, it will take longer for the spindle to stop rotating in an emergency situation. Limit spindle to 1000 RPM and use the lowest RPM applicable to the task.
What emergency protection is given for the lathe machine?
When operating a lathe, requirements include safety glasses or other suitable eye protection, earplugs, footwear and close-fitting protective clothing.
What are the 3 basic areas where safeguarding is required when dealing with mechanical hazards?
All machines consist of three fundamental areas – the point of operation, the power transmission device and the operating controls. Machine safeguarding helps protect workers from preventable injuries in all three areas.May 12, 2021
What are the basic principles of machine safeguarding?
The basic principles of machine guarding state that guards must be affixed to the machine or secured to prevent easy removal, and the guard must protect the operator and nearby employees without creating additional hazards itself.
What do safeguarding devices do to protect the worker select the 3 answer options that apply?
Safeguarding devices either prevent or detect operator contact with the point of operation or stop potentially hazardous machine motion if any part of a worker's body is within the hazardous portion of the machine.Sep 10, 2019