Flex Seal Liquid can be used to fix roof leaks.
Roof problems are one of the biggest annoyances for homeowners in climates like South Florida and Arizona.Natural elements are the cause of roof damage.It increases the chances of damage being done to other parts of the home when the roof is damaged.With a new roof being professionally installed costing an average of over $6000, many home owners simply need a better solution.
The Flex Seal Family of Products can help.Flex Seal is a coating that sprays liquid into the holes in your roof.Flex Seal Liquid can be poured, brushed or rolled on with a paint roller.Flex Seal Liquid can not be painted over.The following steps can be used to bring your roof back to life.
The first thing to do is locate the exact area where the leak is occurring.This can be done by pouring a small amount of water over the area you suspect the hole is located and checking for the leak underneath.To find the cause of the leak, do a small area at a time.Be sure to check the areas where the roof comes to a juncture or add items, such as exhaust pipes.
To apply Flex Seal, you need to clean and dry the area.You should double check that there is no dirt, leaves, oil, or anything else on your roof.Allow to dry.
If you shake the can very well, you can use the original Flex Seal Spray.Flex Seal will work better if there is a vigorous 10 second shake.If you are using Flex Seal Liquid, open the can and stir for 30 seconds.
If using Flex Seal spray, aim at the problem area and spray using an even, sweeping motion.If you want to apply Flex Seal Liquid, you can either pour it out or use a brush.Allow each coat to dry before applying additional coats.It can take up to 48 hours for a coat to dry.Wait until all the cracks and holes are filled.Apply more as needed after inspecting the roof.Flex Tape or Flex Glue can be used for immediate repair.If you can't apply Flex Seal in wet conditions, these can help prevent damage.