QUIKRETE® Self-Leveling Floor Resurfacer (No. 1249-50) can be installed from 5/8 inch (16 mm) thick to a feather edge. For areas deeper than 5/8 inch (16 mm), apply QUIKRETE® Self-Leveling Floor Resurfacer (No. 1249-50) in layers no greater than 5/8 inch (16 mm) each.
How deep can self Levelling compound be?
Suitable for use on most common subfloors such as sand/cement screeds or concrete. It has high flow properties making it ideal for smoothing. It can be laid up to 6mm in depth.
How much floor leveling compound can I use?
The amount of floor leveling compound you will need depends on the size and depth of the dips you'll be filling or the thickness of the topping you plan to install. This is a rough guide based on leveling 100 square feet to various depths: 1/8” – 100 to 120lbs of mix. 1/4″ – 200 to 240lbs of mix.
How much does a 50 lb bag of self leveler cover?
Coverage: One 50 Lb. bag will cover approximately 40 Sq. Ft. at 1/8 In.
How much does a bag of self leveling compound cover?
bag will cover approximately 40 Sq. Ft. at 1/8 In. thickness.
What area does a bag of self leveling cover?
approximately 40 Sq. Ft.
What is the coverage of floor leveler?
At half-inch thickness, a 50-pound bag of Concrete Leveler will sufficiently cover 12 to 15 square feet. For a quarter-inch-thick application, the same size bag would cover between 24 and 30 square feet.Jul 1, 2015
What is the ratio of water to self leveling compound?
Prime the clean dry floor surface using a mix of 1 part QUIKRETE® Self-Leveling Primer to 4 parts water.