- Check the door of the washing machine. Clothes or other foreign matter are probably stuck.
- Perform a hardware reboot. Turn off the washer for 10 minutes, then turn it on again and select the desired program.
- Make sure the cover is closed properly. ...
- Inspect the elements of the lock.
What does the code dL mean on a washing machine?
The F/dL code indicates a door lock error on the machine. When the door fails to lock to allow the cycle to begin, it attempts to lock itself at least six times before the error appears on the digital display screen.
How do I get my LG washer to drain and spin?
For LG front load washers, turn the unit on and without touching the selector dial move to the spin speed selection button. Then press the button until you see your desired spin speed highlighted. Then press the Start button. The unit will drain any excess of water before it spins.2021-10-22
How do I get my LG washer to drain?
If you want to perform a drain-only cycle, turn on your LG washer and press the spin button and then press start. After a few minutes, the cycle will end and your washer should have drained out the water.
What does DL mean on my LG washer?
A DL error on an LG washer indicates that the door lock switch doesn't work properly.
What does DL error code mean?
The DL error code is found only on top-loading models of washing machines. The reason for this code is problems with closing the lid. The lid of the washing machine does not lock, so the system does not start the selected program.
Why does my washing machine says DL?
According to this link, error code dl is a lid lock switch error. Here is a link which shows how to repair a lid switch assembly. To determine if the lid switch assembly is defective, use a multimeter to test the lid switch for continuity. If the lid switch does not have continuity, replace it.2015-10-31
Why does my washer keep saying DL?
What is the DL error related to? The DL error code is found only on top-loading models of washing machines. The reason for this code is problems with closing the lid. The lid of the washing machine does not lock, so the system does not start the selected program.
How do I unlock the engine on my LG washing machine?
To do so, power on the machine, press the spin speed button until No Spin is selected. And then start the cycle. This will activate the drain only function on your LG front load washer. Once the water has drained pause or stop the cycle and the door will unlock.2021-10-22
How do you fix an unbalanced LG washer?
- Make Sure the Load is Balanced. ...
- Run a Rinse and Spin Cycle. ...
- Check That the Washer Is Level. ...
- Adjust the Legs to Level the Washer. ...
- Check the Leveling Legs. ...
- Check the Rotor Mounting Nut. ...
- Check the Suspension Rods or Shock Absorbers. ...
- Check the Hall Sensor.