How do I light the pilot light on a Goodman furnace?
How do I light the pilot light on a Goodman furnace?
- Take a screwdriver and unscrew the side screws on the front panel. ...
- Next, wait about 10 to 15 minutes for any remaining gas to dissipate.
- Then, while holding your lighter against the pilot opening, rotate the switch to the “Pilot” position to ignite the flame.
Why is my Goodman furnace not kicking on?
If your Goodman furnace won't ignite, it could be caused by a major obstruction in the air intake system. Examine the pipes that allow for air intake to make sure they are free of all debris and other types of blockages. Clean them out if it is at all possible.Oct 24, 2019
How do you reset the pilot light on a furnace?
- Step 1: Turn off your furnace. ...
- Step 2: Locate your gas valve. ...
- Step 3: Hold down the red button. ...
- Step 4: Light the pilot light. ...
- Step 5: Let go of the button. ...
- Step 6: Turn your gas back on. ...
- Step 7: Turn your furnace back on.
Why is my furnace turning on but not igniting?
The Pilot Light (Faulty Ignition Sensor) The pilot light or ignition sensor is usually the most common issue when your furnace will not ignite. This is typically the problem if you can hear your furnace click on but it does not fire up. ... If the sensor or ignitor is dirty, it will need to be cleaned.
Where is the reset button on the Goodman furnace?
The exact location of the reset button will vary by model on each Goodman furnace. However, you will need to open up the front panel of the furnace to access it. In many furnaces, the switch will be located in the air handlers compartment next to the blower motor (it will typically be a yellow or red button).Sep 30, 2021
How do I start my Goodman furnace for the first time?
To start a Goodman furnace, switch the furnace's gas valve to the "On" position, close the burner compartment door, then open the external manual gas shut-off valve.Jul 17, 2017
Can I light my own pilot light on my furnace?
The furnace's pilot light ignites the burners and starts the heating process. Pilot lights were once standard on all gas furnaces, but newer systems don't always contain pilot light ignition systems. Instead, some newer furnaces use electronic ignition systems. ... Often, homeowners can relight the pilot themselves.Mar 2, 2017
How do you light a furnace with an automatic pilot?
https://www.youtube.com/watch?v=4EanZniM65Y
How do I relight the pilot on my Goodman furnace?
- Take a screwdriver and unscrew the side screws on the front panel. ...
- Next, wait about 10 to 15 minutes for any remaining gas to dissipate.
- Then, while holding your lighter against the pilot opening, rotate the switch to the “Pilot” position to ignite the flame.
Does a high efficiency furnace have a pilot light?
Hot Surface Ignition: Furnace Ignition | High-Efficiency Electronic Ignition Gas Furnaces. The Hot Surface Ignition Furnace has no pilot light. It lights the burners direct. Therefore it is also referred to at times as Direct Ignition.