- Make sure the washer is paused (press the Start/Pause button). During the spin cycle, this can take up to 3 minutes for the basket to stop spinning and allow you to open the lid.
- Unplug the washer for a minute to reset.
How do you bypass the lid lock on a GE washer?
https://www.youtube.com/watch?v=j8Tr6YoUEmM
Why is my GE washer not locking the lid?
GE Washer Lid Won't Lock If your washing machine's top doesn't lock, the culprit could be lint. But it could also be a snapped latch, a faulty lid sensor, or a failing control board.
Is there a reset button on GE washers?
To reset the electronic controls on your washer, shut off the circuit breaker or fuse to the washer or unplug the washer for 2 minutes. For models that have a timer control knob, turn the knob around and back to any position other than final spin for the interrupted cycle. Then, restore power.
How do I reset my GE washer?
Unplug the washer for one minute, then plug the washer back into the electrical outlet and lift and lower the lid six times within 12 seconds. This will reset the motor and you should be able to start the cycle.
Can you bypass the lid lock switch on a GE washing machine?
Most washing machines come equipped with a lid switch. This switch is connected to a solenoid that completes a circuit, allowing the machine to run only if the top is down. ... A simple bypass for the first type of lid switch is to simply jam a piece of wood into the switch, causing it to activate the solenoid.
How do you fix a GE lid lock?
- Step 1: Remove the four screws and the back panel.
- Step 2: Remove the two screws holding the top cover on. ...
- Step 3: Now the top cover can be removed. ...
- Step 4: Place a small screwdriver in the hole in the lid lock to unlock it.