- Open NAS Navigator.
- Right-click on the NAS.
- Select "Browse Shares" from the pop-up menu.
- Right-click on the shared folder you want to map to a drive letter.
- Select "Map network drive" from the pop-up menu.
- Click on the drop-down menu to change the drive letter if desired.
What is a Buffalo server?
The Buffalo TeraStation network-attached storage series are network-attached storage devices. These devices have undergone various improvements since they were first produced, and have expanded to include a Windows Storage Server-based operating system.
Are Buffalo NAS good?
The LinkStation lacks the high-end features you'd find in more capable but pricier network-attached storage devices, such as the Linksys EFG120. However, if you're looking for the basic conveniences of a print server and network-attached storage, Buffalo's LinkStation is a well-designed and reasonably priced solution.
How do I copy files to Buffalo LinkStation?
Connect to a USB device (USB flash/digital camera/hard drive/card reader etc.) to the LinkStation. While the function button is blue, press it to copy data automatically from the USB device to a shared folder on the LinkStation. The function button will flash blue during the copy.
How do you use Buffalo LinkStation?
- Connect the LinkStation to your network using the supplied Ethernet cable.
- Plug in the AC adapter and connect to the LinkStation.
- Power on the LinkStation by moving the switch on the rear of the unit to “On”.
- Open NAS Navigator.
- Right-click on the LinkStation and choose “Settings” from the pop-up menu.
What file system does Buffalo NAS use?
Buffalo devices typically use XFS filesystem to store the data.
How do I reset my Buffalo NAS box?
- In Settings, navigate to [System] - [Restore/Erase].
- Click [Restore LinkStation].
- The "Confirm Operation" screen will open. Enter the displayed number within 60 seconds, then click [Apply].
How do I reset my Buffalo TeraStation NAS?
To reset the TeraStation to its factory default settings, power on the unit and hold down the reset button for five seconds. In the Web Admin interface, you can initialize almost all settings, including things that are not initialized from the reset button without the data saved in the TeraStation.Feb 1, 2011
How do I reset my LS Wxl Buffalo LinkStation?
- To initialize the settings on the LinkStation using the function button, start by turning off the LinkStation.
- While holding down the function button, turn the LinkStation on.
- Press the function button again while the LED is flashing.
- Initialization will take 5 to 10 minutes.