Remove the clip and spring that holds the drum and developer/toner unit together. Remove the drum shaft and drum – pop the shaft on the left hand side of the drum unit towards you and side it out. Remove the drum cleaning blade. Replace the drum cleaning blade with a new one and re-assemble in the reverse order.28 oct 2014
Can printer drums be cleaned?
Look for chunks of toner on the drum unit. ... After you have removed the chunks of toner, dip a cotton swab in rubbing alcohol. Carefully wipe off any dirty areas visible on the drum. If the drum unit is dirty, apply some rubbing alcohol onto your lint-free cloth and carefully wipe the body of the drum unit.
How do you open the drum on a printer?
https://www.youtube.com/watch?v=J8EUi6-vPMg
How do you clean a printer drum roller?
https://www.youtube.com/watch?v=WUvKtOh1DSw
How do I make my Kyocera printer wireless?
- Select System Menu.
- Select System/Network.
- Select Network.
- Select Wi-Fi (Not Wi-Fi Direct Settings)
- Set Wi-Fi to On.
- Select Setup/Quick Setup Wizard and follow the steps.
Why are my pages coming out black when I print?
Toner or paper dust may have accumulated inside the printer over time and that is why your Brother printer is printing black pages. The solution to this is to clean the interior of the printer as best as you can.
Why is my paper printing out black?
This happens when the rollers or the transfer belt inside the printer get dirty or covered in excess toner powder and as the paper is moved through the printer, the 'tracks' are being left on the page. This is normally the case when the tracks on the page are located at either end.9 may 2017
What is the possible problem if your laser printer is printing black pages?
Problem Possible Cause Solution
----------- ------------------------------------------------------------------------------------------- -----------------------------------------
black page Defective toner cartridge Install a new toner cartridge
black pages High voltage power supply circuit is defective (not supplying the correct negative voltage) Replace the High Voltage Power Supply PCA