Secure chicken wire or wire mesh to the bottom of a chainlink, wood or wire gate. Cut a piece that is roughly double the length of the open area and as wide as your gate. For example, if the gap is 3 inches tall with a width of 36 inches, cut a 6-inch by 36-inch piece of chicken wire, using a pair of wire cutters.
How do I stop my dog from going under the gate?
- Dig a trench in the ground under the gate between the two gate posts.
- Cut a treated landscape timber to length so it fits between the two gate posts.
- Position the landscape timber in the trench under the gate.
How do you block under a gate?
Dig a trench in the ground under the gate between the two gate posts. Cut a treated landscape timber to length so it fits between the two gate posts. Position the landscape timber in the trench under the gate. Attach the landscape timber to the gate posts using galvanized deck screws.
How do I fix the gap under my driveway gate?
Secure chicken wire or wire mesh to the bottom of a chainlink, wood or wire gate. Cut a piece that is roughly double the length of the open area and as wide as your gate. For example, if the gap is 3 inches tall with a width of 36 inches, cut a 6-inch by 36-inch piece of chicken wire, using a pair of wire cutters.
How do I block the bottom of my dogs gate?
You can use chicken wire, hardware cloth, or a piece of chain-link fence attached to the base of the fence. Some people bury it for aesthetic reasons. But you can also lay it on top of the grass and hold it down with rocks, gravel, mulch, or even planters. Pour a concrete footer.
How much gap should be at the bottom of a gate?
For gates with standard 2x4 framing and 4x4 posts, leave a 1/2- to 3/4-inch space between the latch post and the gate frame. On the hinge side, it will depend on the hardware you use. About 1/4 inch is usually sufficient.