If the washer won't drain or is not draining properly, and the washer has a coin trap, remove the coin trap and clean it thoroughly. First, check the drain hose to determine if it is kinked, twisted, or bent. If the drain hose is bent, straighten it out. In addition, remove the drain hose and check it for obstructions.
How do I force my GE washer to drain?
- Press Start to resume the cycle or you can select Drain & Spin and press Start.
- If water remains in the washer, check for a pinched or flattened drain hose.
- If you clear a clog, press START to resume your cycle or you can select Drain & Spin and press Start.
Why won't my GE washing machine drain and spin?
Your washer may not drain and enter the spin cycle if the pump filter is clogged. Clean the filter of any debris and then replace it, reassembling the washer. A clogged household drain can also cause water to stand in the washer and prevent the spin cycle from starting. Contact a plumber to address the issue.
How do I get my GE washer to drain and spin?
If the washer is running, press the "Start/Pause" pad once to interrupt the cycle, then select "Drain and Spin" and press the "Start/Pause" pad again. If the "Stop" pad has been selected and the washer is still full of water, select "Drain and Spin" and then press "Start".
How do you reset a GE washer?
- Unplug the washer for 1 minute from the electrical outlet.
- Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering the lid.
- The motor has now been reset and is ready for you to start a cycle.
Does my GE washer have a reset button?
To reset the electronic controls on your washer, shut off the circuit breaker or fuse to the washer or unplug the washer for 2 minutes. For models that have a timer control knob, turn the knob around and back to any position other than final spin for the interrupted cycle. Then, restore power.
How do you remove the agitator from a GE washing machine?
https://www.youtube.com/watch?v=Qr4GzTJBho0&vl=en
How do you put the agitator back on a GE washer?
https://www.youtube.com/watch?v=Vv01UO6jaoQ
Why does my washer keep Cancelling?
If CAnCELEd ("canceled") is scrolling across the control panel or the two furthest lights are flashing on the control panel (2015 and newer models), this indicates that an error has occurred. Select Drain & Spin and press Start. This will attempt to clear the error.