A portion of Bondo is spread out over a hard glass or metal surface and hardener is mixed in. The mixture must be applied to the door immediately after mixing before it hardens. Wipe the damaged area of door with a wet painter's rag to remove all grime and dust. Use paint thinner if the grime is oily or greasy.
How do I fill a hole in a metal door frame?
Mix and blend the metal bonding filler with the hardener. Use a plastic putty knife, and follow the manufacturer's instructions. Apply a smooth layer of filler to the hole with the putty knife. Overfill the hole to form a slight mound.
What kind of paint do you use on a metal door frame?
Use a paint designed for exterior use, such as an exterior satin or semi-gloss paint. It is best to apply a minimum of two coats to ensure a consistent finish that will last. Make sure each coat is completely dry before adding another.
Do you nail or screw a door jamb?
Use screws, not nails Screw through the jamb in the hinge mortise. The screws will hold better than nails and will be hidden by the hinges. Screws are better for securing the hinge jamb because nails can work loose.
What is the difference between a door jamb and a door frame?
Many people confuse a door jamb and a door frame. A simple way to remember it is that a door jamb is part of a door frame. The flat surface that runs vertically up either side of the door frame is the jamb.
How do you install a door jamb door stop?
https://www.youtube.com/watch?v=hdrnH95BwYk
Can you replace just a door jamb?
Door jambs should last for decades before needing to be replaced, but of course, accidents happen. You may be able to fix a broken door jamb using wood-filler and a bit of sanding paper, but in some cases you might have to install a new door jamb.Sep 20, 2019