- Disconnect the power. ...
- Take the sump pump out of the basin. ...
- Clean out the sump pump. ...
- Return the sump pump to the basin and restart the power. ...
- Reset the sump pump.
Why is my sump pump not working?
If a sump pump won't turn on, it may not be receiving power, the float switch or impeller is jammed, there's a defective component or the pump needs to be replaced. Make sure the unit has power. Check to see that it's plugged in and that the circuit has power via the home's main electrical panel.
What triggers a sump pump?
A float activator arm with an attached buoyant ball, which floats on the surface of the water. Once the water level reaches a certain height, your sump pump turns on.Dec 8, 2020
Where is the reset button on sump pump?
- Locate the reset button on the motor. If there isn't one, locate the on/off switch and turn it off, or unplug the pump directly from the electrical outlet.
- Look inside of the sump pump. ...
- Plug the pump back in or move the switch back to the on position if there was no reset button.
How do I know if my sump pump is working?
https://www.youtube.com/watch?v=PxYRueJJEd4
Why is there no water in my sump pump?
No water in the sump pump is a classic sign of an improperly installed pump or a pump that is not linked to a drainage system. Sumps and Drainage Go Hand-in-Hand. ... If the drain tile is clogged, collapsed, not installed with the proper pitch or non-existent, it will not be able to divert the water correctly.Apr 4, 2017
How do you reset a sewer pump?
- Locate the reset button on the motor. If there isn't one, locate the on/off switch and turn it off, or unplug the pump directly from the electrical outlet.
- Look inside of the sump pump. ...
- Plug the pump back in or move the switch back to the on position if there was no reset button.
How do you activate a sump pump?
To activate it manually, simply reach your hand into the sump basin and press up on the switch until the pump engages. Tether Switches: The classic “float switch on a string.” More common in older pump configurations you may test this float by simply lifting it up and turning it upside down.
Why isn't my sump pump running?
If a sump pump won't turn on, it may not be receiving power, the float switch or impeller is jammed, there's a defective component or the pump needs to be replaced. Make sure the unit has power. ... Check the impeller for clogs. Unplug the sump pump and remove the screen on the bottom of the unit.
Where is the reset button on my sump pump?
- Locate the reset button on the motor. If there isn't one, locate the on/off switch and turn it off, or unplug the pump directly from the electrical outlet.
- Look inside of the sump pump. ...
- Plug the pump back in or move the switch back to the on position if there was no reset button.