- Set up the laser level on a tripod on firm dry ground. ...
- Turn on the laser level and give it a moment to self-level.
- Identify the initial height of your grade. ...
- Place the bottom of the leveling rod at the desired height.
- Adjust the laser detector up or down until you hear a beep.
How do you set the slope on a laser level?
Hold the “down arrow” button on the remote control or laser's keypad, to slope the laser beam down the measuring staff until it gives a continuous tone again, having found set level on the detector. This has now set a 1:40 fall. Return the laser detector to the original set level dimension on the staff.
What is dual grade laser?
The dual slope laser has the ability to give you a read on two slopes on separate axis at the same time, which allows you the possibility of coming up with a compound grade. ... It includes a beam masking feature, which turns off the laser diode on up to three sides to prevent unwanted disturbances.
What does dual grade mean?
The most common example of this type of "dual" certification is that of 304 and 304L (or 316 and 316L). ... Material melted to the lower carbon range and processed to maintain the minimum properties for the straight grade will qualify as both "L" grade and regular grade.
How do you slope a Spectra laser?
Additionally, the X-axis can be sloped by pressing the Left- and Right- Arrow-buttons on the laser or remote control. In vertical mode, the up and down arrow buttons align the laser beam to the right/left side, and the left and right arrow buttons adjust the slope of the laser beam.
How do you find the slope of a laser?
https://www.youtube.com/watch?v=J8TTOVA7VmE
What is a slope laser?
Slope or grade lasers come in two basic types: single and dual slope with options for adjustment. The single slope laser gives you a read on a slope one axis at a time. ... An automatic lasers eliminates a lot of that work, and then there are semi-automatic slope lasers that automatically adjust some of the functions.
How do you set up a Spectra laser?
https://www.youtube.com/watch?v=3d0F1CnhwjI
What is PlaneLok?
PlaneLok automatically locks on to an existing horizontal elevation or vertical alignment point which eliminates all drift or possibility of error due to improper calibration or weather. The unique “Fingerprint” function only accepts the beam from the laser it is paired with.