Cable mounts, also known as Primary Support Modules (Instrument Supports), utilize adjustable, high-strength cables to clamp instrument assemblies to process lines 3″ through 36″ in diameter.
How do you use a push mount cable tie?
https://www.youtube.com/watch?v=PLTmxtUJRrQ&vl=en
How do you remove a push mount cable tie?
All you need is a knife with a sharp tip. Instead of cutting through the cable, insert the tip of the blade into the head of the cable tie between the tape and the tab, known as the pawl. With the tip in place and the tab disengaged, pull the cable tie to loosen it and eventually undo the cable tie completely.
Are cable ties removable?
They and be ratcheted down very securely and hold their position well. A great feature is that they are also reusable. You don't just have to cut the tie and replace it if you need to move it. You can depress the little tab inside the head and remove the tie.
How do you remove a cable tie from the wall?
To loosen the tie, you need to insert something sharp in between the ratchet and the cable tie a pin, needle or screwdriver will work and depress it so that the 'lock' releases. Without removing the implement you have used, simply slide the cable tie and pull it out.
Can you remove cable ties without cutting them?
https://www.youtube.com/watch?v=dwXglX2TsTs
How do you tighten plastic zip ties?
https://www.youtube.com/watch?v=2iHgngH0130
How do you tension a cable tie?
Simple to Use: Place tie around bundle and pull tight with hand. Attach tool at tie head and squeeze trigger to increase tension. Tie is pulled until it reaches the pre-set tension and then is cut off.