The Homeworx is larger than most streaming TV boxes, but smaller than a TiVo or a typical cable box. Plug any antenna into it, then plug it into a television via HDMI or composite video output, and you can start watching live broadcast channels. Connecting an external USB hard drive enables the recording functions.
Why is my converter box not working?
If you are having problems, check for loose or corroded wiring or broken antenna elements. Also check the direction the antenna is pointed. Try to keep the length of wire between your antenna and digital-to-analog converter box or digital television as short as possible for best reception.
How do I get my converter box to work?
Using the coaxial wire that comes with your Converter Box, plug one end into the “Out To TV (RF)” port on the Converter Box. Plug the other end into the “Antenna In (RF)” port on your TV. Plug the power cords on your Converter Box and TV into a power outlet, and turn on your TV and Converter Box.
How do you reset a converter box?
- Turn on your converter box, go to the "Function" menu and then select "Factory Reset."
- Enter your PIN number (created during the initial setup) when prompted, and press "Yes." The reset process will now begin, reverting your converter box back to its factory settings.
Why is my TV not picking up channels?
First check that your TV is set to the correct Source or Input, try changing the Source or Input to AV, TV, Digital TV or DTV if you haven't already. If your “No Signal” message is not due to incorrect Source or Input being selected, then it's most likely caused by a set up or antenna fault.
How do you scan channels on a digital converter box?
https://www.youtube.com/watch?v=HdYMU3wzOC0
How do you program a converter box remote?
- Scroll to the last page of the PDF file from the RCA Converter Box manual.
- Press the "PGM" button on the remote control.
- Point the remote at the device, and press the buttons on the remote to see if the programming code worked.