- Mechanical Steam Traps. ...
- Thermodynamic Steam Traps. ...
- Thermostatic Steam Traps. ...
- Applications Suited to the Free Float® Type. ...
- Applications Suited to the Disc-Type. ...
- Applications Suited to the Thermostatic Type.
What is the difference between thermostatic and thermodynamic steam trap?
Thermodynamic steam traps operate on the dynamics of steam vs condensate and the use of Bernoulli's principle. ... Thermostatic steam traps remove condensate through the temperature differential. The valve is controlled through the uneven expansion and contraction of a bimetallic element.
What are the different types of steam traps?
Steam traps can be split into three main categories; Mechanical, Thermodynamic, and Thermostatic. Each type uses a different operating principle to remove condensate and non-condensable gases and keep steam in the system.
How does the steam trap work?
steam trap - Self contained valve which automatically drains the condensate from a steam containing enclosure while remaining tight to live steam, or if necessary, allowing steam to flow at a controlled or adjusted rate. Most steam traps will also pass non-condensable gases while remaining tight to live steam.
How does a radiator steam trap work?
The steam pushes all of the air ahead of it through the supply pipes connecting to radiators. The air in the supply pipes travels through all of the radiators which then passes through the steam trap. Once the air passes through each radiator the steam causes the steam trap to close and allow the radiator to heat up.
How do I know if my steam trap is working?
Condensate should usually be flowing through a trap, and the sound should have a lower pitch. So, if this sound changes and appears much closer to a higher pitched sound like that of steam flow, then the trap may have a large amount of flash steam or may be leaking live steam and should be inspected further.
How long does a steam trap last?
approximately six years
What is the purpose of a steam trap?
The duty of a steam trap is to discharge condensate, air and other incondensable gases from a steam system while not permitting the escape of live steam.
What is an F & T steam trap?
F&T traps keep steam from passing by. They are normally closed automatic valves that work like ballcocks. When they're working, they stop steam dead in its tracks. You need them if you have a condensate pump because condensate pump receivers are vented to the atmosphere.Jun 24, 2014
What is used of steam trap?
Steam traps are a type of automatic valve that filters out condensate (i.e. condensed steam) and non-condensable gases such as air without letting steam escape. ... Steam traps are used in such applications to ensure that steam is not wasted.