The passive anti-theft system on Ford F-150 prevents someone from starting the vehicle with an incorrectly coded key. The passive anti-theft system arms when you switch the ignition off. It disarms when the ignition is switched on with a correctly coded key. Note: Do not leave a duplicate coded key in your vehicle.6 feb 2021
What is Ford passive anti-theft system?
What Is Ford SecuriLock® Passive Anti-Theft System (PATS)? SecuriLock is an engine immobilization system. It helps to prevent anyone from starting the engine without using a coded key programmed to your vehicle. Using the wrong key could prevent the engine from starting.
What causes the anti-theft system to come on?
The anti-theft system on a car might activate if you have a dead key fob battery and the system hasn't been disabled. Check to be sure that the battery on your key fob is installed correctly. ... Many vehicles have a valet door or key that performs only functions such as unlocking doors.
What triggers Ford alarm system?
When armed, the anti-theft alarm is triggered in any of the following ways: If someone opens a door, the tailgate or the hood without a correctly coded key or remote control. If you turn the power on without a correctly coded key. If the interior sensors detect movement inside your vehicle.6 feb 2021
How does the anti-theft system get activated?
The anti-theft system on a car might activate if you have a dead key fob battery and the system hasn't been disabled. Check to be sure that the battery on your key fob is installed correctly. Step 2: Check the door lock cylinder.
How do I disable anti-theft system?
To turn off the anti-theft system, use your remote to press the unlock button key. It is advised to use the key to unlock the door and turn on the ignition switch. If that does not work, try to lock the door on the driver's side using the key while you are out of the car.8 oct 2021
How do I start my car after anti-theft reset?
Another trick you can try is to use the key to start the engine. If the engine does not respond or dies immediately after cranking up, leave the key in that position for 10 minutes. When the security light goes off, turn the ignition off, wait 20 seconds, and then start the engine.2 feb 2021
What is Active anti-theft system?
Active anti-theft systems: An active anti-theft systems must be turned on or activated by the driver to be on and working. They are usually turned on by clicking a button on a remote or key. ... They are a little more work for the driver but can make your car very difficult to steal.2 oct 2018