How high to hang a dart board from floor to the bullseye?
There are certain requirements for the height and distance of the dartboard.If you are setting up your dartboard at home, these are not important.If your board is to be used for competitive play, you will want to make sure your lineup is correct.
If you play darts frequently at your local darts hall.You may not be used to playing on a dartboard that has the correct height and distance.It is more difficult to play to competition regulations.Which will affect your game a lot.
The reason why you need to follow mounting rules is because darting has a strong history.The game has evolved over the years, and the current rules are a result of a lot of trial and error.They are the ideal conditions for playing darts.
The bullseye is 173 cm from the floor to the center of your dartboard.
The back of your wall is not the correct distance from the front of the dartboard.The official name of your throw line is this word.
The throw line isn't a line per se, but a piece of wood positioned in the middle of your floor that also has a unique set of measurements.There are very precise rules that you need to follow in darting.
If you decide to read online about dart distance and height, these are the most common measurements you will find.The World Darts Federation has a membership of 70 countries around the world and they use these measurements during darting competition.
If you follow these measurements, you will be meeting professional standards as you take part in darting competition among friends or practice for an official competition.
7ft and 9 14 inches are listed as the closest throwing distances by the world darts federation.Feel free to stand further back, as some darts players do.The assumption in this game is that the closer you are to the dartboard, the higher your chances are of scoring high.
A bit of practicality is important.With the exception of a handicap dart, which affects a player's distance from the dartboard, we came to the realization that the type of dart board is what dictates the height and distance.
As dartboard rules regarding the appropriate height and distance mentioned above apply to a bristle steel tip dart board, it is generally the most common in all darts organizations.
Depending on the dartboard you choose, there are different set of measurements you need to abide by.
The soft tip darts community lists their throw distance as 8 feet from the face of an electronic dartboard.The figure is a little different from a traditional bristle dartboard.Measurement changes with regards to dartboards and dart types, as well as with culture.
The dartboard design in Belgium was changed to make it easier for players to throw darts.Otherwise known as Vogelpiks.
There are dartboards in the US that have a fresh design.These are unique to them as well.
Most of the deviations in dartboard setup are due to the board itself.The setup for players using a wheelchair is the only exception to this.Wheelchair measurements are applicable for both bristle and electronic dartboard use because there is no specific soft board measurement for wheelchair users.
It is easy to understand the rules of darts, which is an advantage over other games.You don't have to be in great shape.It doesn't require a lot of physical effort.The game is popular among physically handicapped people.
The dartboard height was reduced from 173 cm to 137 cm.After taking it down to 136.5 cm, Darts Australia decided to take it back to 137 cm.
There is information on the darts disability platform about how Russ came to 137 cm.
Until Russ figured out that 173 cm was the mean height of a typical man in the 1920's, nobody could explain why this figure was chosen as the official height.
The first electronic dartboards were invented in the US, which is where they are today.
The larger scoring zone on the electronic dartboard makes it easier for a player to score.It is easy to score points on the electronic board for players who are used to bristle dartboards.
Soft tip darts are a recent invention.Rudy Allison, an American, developed them in 1975, after he witnessed a lot of delay caused by dart scoring.The advantage of an electronic dartboard is that it saves time when playing alone or with friends.
Electronic dartboards allow you to play against players in another country, from the comfort of your own home.The whole experience is real time, just like video games.
Steel tip boards have the same dimensions as electronic boards.The dartboard is the same height as it was from the floor to the center.
When it comes to throwing distance, it was increased to 244 cm from 237 cm, which brought it up to 8 feet.
The dartboard should be mounted flush.It is up to you, but it is highly recommended that you have a backing.
The best place to mount directly onto a wall is on a wooden or concrete wall.Some people prefer to anchor their dartboard with heavy-duty screws.This is not the best way to mount a dartboard.
The dartboard comes with metal hangers.There are three spring clips that you can use to level the dartboard on the backing surface or wall, as well as a center screw in the package.
The dartboard dead center has a center screw fixed to it.The spring clips are installed at the back of the dartboard.There isn't a location where you should install the spring clips.They need to be installed evenly across the back of the board.We would suggest a triangular formation.
The U-brackets are screwed onto the wall.The U-slot's bottom should be positioned about 5 feet and 8 inches above the floor level.The back of your board has screws that sit here.The center of your board should be at this precise height.
Put the screws into the U-shaped slot by sliding your dartboard.The dartboard shouldn't move at all on your backing.If there is movement, tighten the center screw on the board and slide it back onto the brackets.The screws should be tightened with the right amount of Torque.
The hanging kit is the other option that you can try.The mounting pieces of the kits are strong.There is a disc with a dead center at the back of the board, as well as wide U-shaped brackets that are screwed onto the wall or backing surface.
There is no need for spring clips with the disc style mounting kit.The board is secured and level with the width of the brackets and discs.It is easier to position the board dead center using this method.
It would make sense to replace your dartboard assembly with the most modern hanging kit.You have to measure to the correct height of 5ft 8inches with the U-shaped brackets.
The most comprehensive solution to backing for darts players is cabinets.There are a number of materials you can use to make cabinets.They are usually made from wood, such as Rosewood or Oak.They are due to their function and appearance.
The dart boards and holders are usually mounted on the cabinet side doors.Some cabinets have built-in lighting, while newer models have electronic or LCD displays that you can use to keep score.
The backing surfaces include cork, carpeting, or plywood that has been covered in a black material.There is no limit to how creative you can be.There is a choice of decorative or functional backing material in this case.
The board's diameter is around 18 inches.The backing should be around 3 square feet so that there is room for the dartboards and for any stray darts.
It could be a chalkboard or dry erase board.The scoring columns and numbers for cricket and darts are pre-printed.
If you want to throw darts, you have to stand behind a marked line, which is commonly referred to as the Oche.The next thing is to make the line visible after you have measured the correct distance from your dartboard.
A strip of tape is good for some dart players.Anything that can handle foot traffic will stick to the floor.Ensure the front edge is positioned across your throwing line by laying your strip.
It will be possible to stand on your strip as you throw.The toe should be behind the strip tape.The term toes line comes from this location.
The majority of sports bars and pubs use a wooden plank as an Oche.It is possible to raise wood to any height, which is usually 1 12 inches.
A player stands behind this strip, with other foot pressed against the wooden oche, like in the examples given below.
The dartboard and throw line are on the floor.If your floor is made of expensive hardwoods, consider placing a thick mat that can handle stray dart tips.If you have a concrete floor or some other kind of hard floor surface that might cause your tips to break, placing a protective layer is a good idea.A vinyl rubber mat is the ideal option.We found this option on Amazon.
The floor below the dartboard is protected by mats.The mats are usually 14 inches in thickness, 30 inches wide and 10 feet in length, designed to fit within the dart throw area.They are pre-printed with measured toe lines.
A rubber mat is an ideal way to distinguish between the throw area and the rest of the floor space in your house.Roll it up and put it away, until you decide to play again, and the dartboard is fixed to the wall or behind the cabinet.
You could use a rug or soft material to protect the floor.If you already have a carpet on the floor, you are good to go.
Check out our review of the best dart mats we have found and reviewed online, if you are looking for a suitable dart mat.
It's important to have good lighting for your dashboard setup.You don't need an expensive setup.The spotlights are placed above the dartboard.The lighting can be mounted on the ceiling, right above your dartboard, or at a considerable distance away.
To angle it back so that it shines directly onto your dartboard is the most popular way to set it up.If you want to mount it away from your dartboard, make sure you have enough room for the dart player.
The entire face of your dartboard should be illuminated by the spotlight.You may experience shadows if lighting isn't enough.
Go for a basic overhead light if you want to keep the lighting simple.The important thing is that you angle the light so that there is no shadows on the dartboard.No light should be pointed towards the players face.
A three-light-mount configuration is preferred by most homeowners.The idea is to be able to angle the light to create an overlap or cross lighting effect, which will minimize shadows from each spot light.
There are a few basic safety considerations that you need to keep in mind when setting up your playing space.
If you want players and visitors to stay off the path of flying darts, you need plenty of room.darts can sometimes bounce out and cause harm to people who are close by.
The area around the dartboard should be free of fragile materials, such as windows, glassware and TV screens.Don't put your dartboard in a place where a person can walk in as you play.
Although dartboards are made from high quality materials like Kenyon Sisal, they need regular maintenance to ensure they don't suffer wear and tear, and prolong it's lifespan.There are a few things you can do to keep your dartboard in tip top shape.
A dartboard is prone to wear and tear.The most targeted areas of the board tend to wear out faster.
They should never get wet.Try to keep your dartboard dry.It also means that you should not install your dartboard in a high humidity environment.
Most of the steel darts on the market are engineered with a lot of precision to improve performance characteristics such as grip, accuracy and to minimize bounce.
Some newer designs have been found to cause damage to the dartboard.If you want the darts to not cause damage when they land on the dartboard or when you come to pull them out, make your tips smooth and sharp.
We have put together a guide to help you sharpen your darts.Here is a useful example.
The size of a dartboard is 18 inches in diameter and is made up of 20 numbered segments of equal size, which are further divided into double and treble scoring zones with an inner and outer bull in the centre.
Q2.The dartboard's height from the floor to the bullseye is 5 feet 8 inches.
Q3.The toeline should be 7 feet away from the face of the dartboard.
Q4.The minimum playing area for a game of darts is 5 feet wide and 11 feet long.Standers are used to protect nearby furniture.
Q4.A player can lean over the throw line as long as they are not standing with any part of their foot over it.A foul is called if a player extends his foot over the line.