Fork Length – The most common fork length is 42-inchs for both Class II and Class III carriages. This size allows for a standard 48-inch length pallet to be adequately supported without the fork tips protruding and possibly damaging whatever is behind the skid.
How do you measure forklift forks?
- Measure from the front of the fork to the tip to determine the length.
- Measure from side to side to determine the width.
- Measure the thickness of the forklift's back side.
What size forks do I need for my forklift?
Typically, forklift trucks that are up to 2500kg lift capacity will have Class 2 forks. Then up to 5000kg lift capacity would be class 3 forks and up to 8000kg lift capacity would be class 4 forks!16 oct 2019
How wide can forklift forks spread?
RE: Forklift Feet Spacing Standards High capacity forklifts can have fork spacings as much as 9 or 10 feet. Generally, the forks can be adjusted from almost no clearance between them to the maximum spacing of the particular lift truck.4 ene 2011
How do you widen forks on a forklift?
- Determine the best setting for the forks on your forklift. ...
- Raise the forks to a height of approximately 30 inches. ...
- Raise the fork slightly. ...
- Shift the fork slightly until it drops into the notch nearest the desired distance.
How do you put in fork extensions?
https://www.youtube.com/watch?v=Hb2EgHjzHvw
What is a fork extension?
Forklift extensions extend the length of a forklift's existing forks. They are typically made of structural steel and slip over existing forks. They are available in many sizes, finishes and profiles to meet specific application needs.
Can you modify forklift forks?
DON'T Modify the Forks Forks take a lot of abuse, and you may be surprised how easily they can be compromised. Forks should always remain parallel to each other and inspected regularly for bends and signs of wear or unevenness. A bent fork is a dangerous fork.20 mar 2020
What are the dimensions of a fork?
Length of fork (L) – measure from the end of the tip to the shank. Length can be given in mm or inches, common lengths are 48” inch, 72” inch and 96” inch. Width (W) = width of the fork at its widest point. Thickness (T) = thickness of the forks is measure on the shank.18 jun 2019
How are pallet forks measured?
To determine length, measure from the front of the fork to the end of the tip.