At least three clips should be used when making any prepared loop or thimble-eye termination for wire rope (especially for overhead lifting). All three clips must be installed with the saddle part on the live end of the rope.
What is the proper way to install cable clamps?
https://www.youtube.com/watch?v=HKt6kswEAXo
How do you use cable clips?
https://www.youtube.com/watch?v=-SSJl3pxvME
How much space do you need between cable clips?
Turn nuts firmly but do not tighten. STEP 3: Apply all other clips, spaced equally between the first two. They should be 6-7 rope diameters apart. STEP 4: Apply tension and tighten all nuts to recommended torque.
How far apart should cable clamps used for wire ropes be spaced?
Proper Usage of Wire Rope Clips Clips are usually spaced about six wire rope diameters apart to give adequate holding power. They should be tightened before the rope is placed under tension.
How far apart do you clip Armoured cable?
When fixing cables to exposed horizontal surfaces, the spacing of metal fixings should be approximately every 300mm. For vertical running cables that are exposed, a metal clip every 400mm is recommended.Feb 7, 2020
How do you use wire rope clips?
https://www.youtube.com/watch?v=Sc71eBlwh6c
When installing wire rope clips on a wire rope the base or saddle of the clip is installed on the?
There are two sides of a U-Bolt style wire rope clip: the saddle and the U-Bolt. When securing a wire rope eye, it is important to place the clip on the correct end of the rope. The saddle of the clip rests on the live end of the rope, while the U-bolt is to rest on the dead end of the rope.Aug 24, 2020
When you install wire rope clips remember to never saddle?
Never use a wire rope clip to directly connect two straight lengths of wire rope. An important phrase to remember when applying a wire rope clip is “Never Saddle a Dead Horse”. This means you should never apply the saddle side of the clip over the dead end of the rope – the live end should always rest in the saddle.Jun 25, 2018