The average cost of basic pressure treated pine runs about $15-$25 per square foot. Fancier woods will cost a bit more, usually between $25-$30 per square foot.
How much does pressure treated decking cost?
Initial Cost The average cost of basic pressure treated pine runs about $15-$25 per square foot. Fancier woods will cost a bit more, usually between $25-$30 per square foot. This is the cost for a basic deck.
Is pressure treated plywood worth it?
The long life and low maintenance you can get out of pressure treated wood products, makes it an ideal choice when building projects which will remain outdoors. Pressure-treated plywood is just as useful as other pressure-treated wood products, even though you don't encounter it quite as often.26 Feb 2015
How long does pressure treated spruce last?
40 years
Which is Better pressure treated or ground contact?
Ground-contact pressure-treated lumber can be used either above ground or in contact with the ground. Has twice the level of chemical retention and protection compared to above-ground treated wood. Must be used when lumber is less than 6 inches from the ground or has poor ventilation.
Why does pressure treated lumber say not for ground contact?
Pressure-treated wood is softwood lumber, typically southern yellow pine, that's been chemically treated to resist rot, decay and termites. Lumber treated to “Ground Contact” has a high chemical retention level and can be placed directly on or in the ground with better protection against rot or decay.28 Jun 2019
How do you tell if pressure treated is ground contact?
How Can I Differentiate Treated Lumber? Most pressure treated lumber will have an end tag to identify what type of chemicals it was treated with and whether it is rated for “ground contact” or “above ground use” only.8 Sept 2021
Do I need ground contact lumber for deck?
72% of lumber dealers said the new standards helped their business by eliminating dual inventories. All the professional deck builders interviewed said all components should be ground-contact treated lumber. Deck safety was this group's unanimous No.20 Feb 2018
Is #1 or #2 treated lumber better?
Typically wood that is two or more inches thick is graded only for strength, denoted by #1, #2 and so on. And because stronger lumber has fewer and smaller knots, it's typically more attractive. So the general rule of thumb for lumber grades is this: the lower the number, the more strength and better appearance.
Are there different grades of pressure treated lumber?
Pressure treated lumber grades. Most treated lumber does not come in different grades, the exception being plywood, which will come in both ACX and CDX grades. Virtually all treated lumber is considered for construction only those grades do not take appearance into consideration.8 Oct 2020
What is the difference between premium and standard pressure treated lumber?
The amount & type of chemical treatment. Premium uses micronized copper suited for ground contact & guaranteed for period of ownership while standard is not & still uses. CCA, copper chromate arsenic for above ground protection.
What is the difference between brown and green pressure treated lumber?
The difference between green and brown timber, is that brown timber is also pressure treated but has a traditional brown finish due to a brown dye being added to the pressure treatment process. This does make brown timber slightly more expensive.
Will pressure treated wood rot?
Pressure-Treated Wood Makes the Grade Pressure-treated wood in contact with the ground needs the most protection, and will rot in just a few years if you use the wrong grade. If you're planning a DIY project, make sure to tell your lumber dealer the end use, so you'll get the right grade.
What is wrong with pressure treated wood?
What's bad about pressure-treated wood? Because of the vacuum, the chemicals are carried deep into the wood. Chromium is a bactericide, copper a fungicide, and arsenic an insecticide, and all arrest decay of some kind. All three are toxic, but chromium and copper don't raise many concerns.