As a rule, sit-down counterbalanced forklifts need aisles at least 12 feet wide to handle standard 48-inch pallets.23 Apr 2019
How wide are pallet jack forks?
Industry seems to have 'standardized' pallet jacks in several ways: Width of each of two Forks: 7" (17.78 cm) Fork Width, i.e. The dimension between the outer edges of the forks: Available as 20¼" (51.4 cm) and 27" (68.6 cm) Fork Length: Available as 36" (91.4 cm), 42" (106.7 cm), 48" (122 cm)
How do you measure the width of a pallet jack?
https://www.youtube.com/watch?v=3aI67KdTuI4
How wide is a narrow pallet jack?
Small or inconveniently designed shipping spaces can delay the conveying of products, which makes the CPI Narrow Pallet Jack a perfect choice for narrow areas. This uniquely sized pallet jack has a fork dimension of 18" x 48", a maximum weight capacity of 5,500 lbs, and 8 gauge, 6″ wide forks with an 18″ overall width.
What is the standard width of a pallet jack?
27” wide
How do you measure a pallet jack fork?
while the low profile models can hold up to 4,400 lbs. Measure inside to inside of the outer pallet stringers of your pallets. Select the fork width that gives you at least 1” clearance on either side of the forks.
How much clearance does a pallet jack need?
As shown in the table above, to avoid damage or unintended impacts with rack components, pallets should have a minimum clearance of 3 inches between two pallets or one pallet and the upright frame.1 Sept 2018
What is the turning radius of a pallet jack?
Load Center: 23.6” Minimum Turning Radius: 54.9”
What should I look for when buying a pallet jack?
- Length. You don't want to purchase a pallet jack that is the wrong length.
- Capacity. It is very important that you buy a pallet jack that is equipped to carry the items that you transport.
- Pallet Jack Weight.
- Lift Height.
- Wheels.
What size pallet jack do I need?
The standard shape of a pallet jack is 27” wide by 48” long. 85% of our customers require this shape because it best fits a standard 48”x40” pallet.
What are the different pallet jacks?
There are four main types of pallet jacks that DACO offers. Those are standard, corrosion-resistant, electric, and custom. Standard pallet jacks are one of the most cost-effective options. They allow you to move pallets easily across the floor, from one area to the next.16 Apr 2020
How are pallet jacks measured?
Pallet trucks are classified by the size of their cargo area. The most common size Pallet truck is 27” x 48”. This means that the width of the cargo area is 27” as measured between the outside edges of the forks. 48” refers to the length of the forks.