After the pool is full it usually takes up to 1 week before the pool is ready for you to swim. The shortest timeline we have seen for swimming after filling a plaster pool is 5 days.
How long does it take pool resurfacing to dry?
Your pool will take generally 5-7 days to harden and seal, but after this you're free to use it again!! All told, a start to finish resurfacing job will take from 9-14 days depending on the weather, size of your pool, and if there are any unforeseen complications.31 oct 2016
How Long Does Diamond Brite pool finish last?
eight to 12 years
How thick should Diamond Brite be?
3/8” to ½”
How is Diamond Brite applied to a pool?
Check mix water for metals, minerals, hardness, and alkalinity before use. Start the mixer and add Diamond Brite as quickly as possible to ensure that all the material has the proper mix time. Mix for a minimum of five (5) minutes but no more than ten (10) minutes.
How much does a bag of Diamond Brite cover?
Coverage: Each 80 lbs. bag will cover approximately 22—25 sq. ft., to a thickness of minimum 3/8″—½”.
Is Diamond Brite a good pool finish?
Diamond Brite is an exposed aggregate, which means it isn't smooth. With a life expectancy of 10 to 15 years, and with a stunning appearance, it is an excellent choice for some pools.3 ene 2020
When can you swim after Diamond Brite?
The filter can be set for normal operation with a Diamond Brite pool. Do not swim in the pool until there is no longer evidence of plaster dust in the water and chemicals have been balanced. Do not use the pool sweep cleaner for at least ten days subsequent to the application of plaster or Diamond Brite.
How long does Diamondbrite take to cure?
Allow BOND-KOTE to cure for at least six (6) hours before plastering. The plaster should be applied to BOND-KOTE within three (3) to five (5) days. If left for a longer period before the finish is applied, ensure Bond Kote is clean and free of dirt, efflorescence, and other contaminants.
How do you take care of a new Diamond Brite pool?
Keep some extra Diamond Brite mixed up for use in patching washout areas. Keep a sump pump running in the main drain at all times to discharge the wash solution. Dispose of wash as directed by local requirements. Avoid leaving hoses, buckets or any other items on the plaster during exposure.
Is Diamond Brite waterproof?
In short, there are four main types of plaster that Absolute Pools uses to waterproof your pool, each of which has many variations. They are marcite, Diamond Brite, Hydrazzo and PebbleTec.13 may 2016