Tennis racquets are built to endure intense activity on the court, absorbing sunshine, sweat, water and the force of tennis balls traveling at high speeds.The strings of a tennis racquet are the most important part and should be maintained.It is important to restring a racquet at least twice a year.You can learn how to approach the restringing task with proper technique.
Step 1: You can find a stringing machine.
Many health clubs, sports stores, and gyms with tennis courts have string mounts they use to restring racquets at a cost.Depending on the quality, the machines cost from $200 to several thousand dollars.You'll be able to recover the savings of buying your own stringing machine relatively quickly if you pay to have $6 worth of string put on your racquet.There is a 2-point mounting system and drop-weight tension on the Gamma X-2.It's the cheapest and highest-quality string mount.It doesn't make sense to invest in your own string mounting system on weekends.When the strings wear out, you can pay to have your racquet restrung or use yourself for free.
Step 2: Take out the string.
Start by cutting 35 to 40 feet (10.7 to 12.2 m) of new string.For a 95 square-inch racquet with a basic crossing pattern, you'll need about 38 feet of string to finish the job.It's better to cut off too much and waste some than start with too little and have to start over.Cut a piece of the appropriate size for your racquet after you string up your first racquet, to account for the extra knots you've used to tie.Home in on your ideal string length if you start with too much.
Step 3: The racquet should be prepared for stringing.
Cut the old and broken strings from the racquet as soon as possible after you decide they're worn out, or one breaks.Start with the strings in the middle of the racquet.If the rubber grommets on the rim of the racquet are showing signs of wear, replace them.
Step 4: The machine has a stringing machine.
Depending on the restringing machine you're using, the mounting process will be slightly different.Press down on the clamps to secure the head and neck of the racquet.The tension should be adjusted as directed.If you use a 6-point mounting system, the tension on the racquet will be distributed more evenly, but you need to make sure the clamps are secured.It should be tight enough to stay still when you shake the grip, but not so tight that it warps the frame.
Step 5: You can choose between a one piece or two piece pattern.
One way to string a racquet is to use one piece of string for both horizontal and vertical stringing.Some tennis players think using a single piece of string increases the life of the set and the racquet, while the proper technique on some racquets makes the use of two pieces more desirable.It is important to string the cross strings from the end of the racquet to the bottom of it's face.Since the throat is weaker than the head, it's better to start at the top and work down.This can be difficult with a single piece of string.
Step 6: The main strings should be pulled.
The long axis of the racquet is parallel to the main strings.Attach the string to the head of the racquet by threading it through the neck.Move the rod into the horizontal position by securing the end of the string in the grip.You might have to adjust the length of the string you threaded through the racquet.You can tighten the string by twisting the rod.The second string should be fixed and the first string released.Continue threading until all holes have been strung, tighten one, secure the next, and then release the previous string.
Step 7: The main strings need to be knotted.
After securing the main strings, release the tension rod and tie the end of the string securely using a small awl and needle-nose pliers.From the short end, tie a knot on one of the strings.The string should be cut off.
Step 8: The crosses should be strung.
When you get to the last row of main strings, you'll tie the string off and begin the crossing pattern.The long axis of the racquet has cross strings running parallel to it.If you want to weave the string over and under the main string, you have to insert it into one hole.Attach the first string with the same amount of tension you applied to the main strings.Continue weaving until crosses are strung.If you're going to use two pieces of string, tie the crossing string to a main string at the head, then thread it back through the big grommet on the nearest edge of the rim, proceeding as normal.The crossing strings should be rubbed as little as possible.The life of the strings and the racquet will be shortened if you wear the main strings before you use them.
Step 9: The cross strings need to be knotted.
Attach the last crossing string to a main string by threading it back through one of the main grommets.Remove the racquet from the mount by releasing the tension and cutting off the string.
Step 10: Pick the string tension you want.
The recommended tension on most racquets is between 50 to 70 lbs.The weight is 23 to 32 kilograms.The amount of tension on the strings can be tailored to the player's style of play.Keep the strings tighter.More touch and accuracy can be achieved with tight strings.looser strings are recommended for more power.Play with different tensions to learn what works best for you and your racquet.
Step 11: Use different strings.
You have to experiment with different brands and strings to find a good one.Tennis strings are made of synthetic fiber.The cheapest and most popular strings for theirVersatility and Crisp Touch are the ones that are being used for tennis racquet strings.It's best for heavy-hitters and string-wreckers.The strings work best together for strength and control.They are the most expensive, sensitive, and fragile of the varieties and are very popular among professional players.
Step 12: Savers and string dampeners can be used on your racquet.
The crossing points of the strings can be protected from wear with small plastic platelets.The use of string dampeners will help players who put a lot of topspin on the ball.Try them out on the court.
Step 13: As you play in a week, make sure you string your racquet as many times as possible.
It's time for a restring if your strings break, but what about a regular routine?A good rule of thumb is to rest your racquet as often as you can.You should rest your racquet every six months if you play twice a week.Big hitters and heavy hitters will need to rest their racquets more frequently than occasional players.