How to build a cinder block foundation and how I fixed it, can anyone explain.

The cheapest kind of base is a cinder block foundation.The technology of construction can be mastered by a beginner, and the price of cinder block is low.

Cinder blocks are usually made of a mix consisting of sand, cement, brick battle and water.It helps to dispose of non-toxic waste of any kind of production and reduces the cost of building materials if you build a cinder block foundation.Foundation block dimensions are usually 15*7*8 inches.

There is attention!Even if the building is built on dry ground, the walls of the basement should be insulated.To protect the vertical plane of cinder blocks, it is necessary to lay a horizontal layer between the underground and above-ground parts of the building.This helps to keep the house walls from getting too wet.

It is not possible to lay the base on dry soils with low levels of underground waters.A cinder block foundation can't be built on clay grounds.There is a lack of stability.

The construction is following if the site is in a zone of deep groundwater or soils with no unnecessarily moving beds.

You should dig trenches for tape bases or settle pits for columnar ones first.There is a layer of sand and gravel on the bottom of the trenches.Prepare roofing paper and spread it over your foundation bottom.A block of concrete can be poured on top of a layer of roofing material.The first row of blocks should be laid after the arrangement of the foot on the concrete.The upper and lower layers are connected with a thin layer of bonding solution from the corners to the center.The operation is repeated until the height is met.The upper part of your foundation should be made of wood or metal.The walls of the basement are usually covered with mastic at the end, followed by styrofoam panels.After filling the pit, you can go to the construction of the wall of your house.

The cinder block foundation is ready.Proper exploitation will allow it to serve you for a long time.