How To Clean a Cool Mist Humidifier

It's a good idea to clean your cool mist humidifier every day.Remove the water tank and allow it to dry out before you replace it.It is necessary to remove the scale and clean the unit to prevent the growth of organisms.The cool mist humidifier needs to be descaled at least once a week.

Step 1: The water tank needs to be removed from the base.

Remove the water tank from the base after turning the device off.It is possible to achieve this by turning the tank clockwise or counterclockwise, though the specific method of removal depends on the manufacturer.There is more information on how to remove the water tank from the cool mist humidifier.

Step 2: The water tank should be emptied.

The cap on the cool mist humidifier needs to be removed.Your water tank's cap might come off.Take the water out of the tank and put it in your sink or tub.

Step 3: The tank should be washed with water.

The tank should be filled halfway or more with water.It's in the tank.Put the water in your sink or tub.After rinsing, wipe the tank dry.

Step 4: The filter needs to be dried out.

The water tank should be emptied.With the cool mist humidifier turned off, you can dump the water out into your sink or tub.If you don't need to replace the water tank, turn the machine on.The filter will be able to dry out.Remove the cool mist humidifier from the electrical outlet when you are done.

Step 5: The filter needs to be removed.

The cool mist humidifier has a component called the wicking filter.Dry air becomes humidified when it moves through the filter.The filter in some cool mist humidifiers is a flat piece, while in others it is an open-ended cylinder.It has a sort of mesh-like appearance.You might need to disassemble the cool mist humidifier.Don't tear the filter by handling it gently.Depending on the type of cool mist humidifier you have the removal process will be different.You should consult the manufacturer's directions for more information about removing the filter.

Step 6: The water tray needs to be removed.

The pool beneath the cool mist humidifier is the water tray.The water tray may need to be removed from the base of the humidifier.

Step 7: The water tray has something on it.

To fill the water tray, use white vinegar.Allow it to sit for 20 minutes.The parts of the tray that are not submerged can be wiped with a sponge.If you are cleaning the water tray, be careful not to mess with the surface.Unless otherwise directed, do not use soap, detergent, or any other type of abrasive cleaner to clean your cool mist humidifier's water tray.When you reassemble the humidifier, the cleaner will be aerosolized and you will end up breathing it in.

Step 8: The water tray needs to be cleaned.

After you have wiped the water tray down, rinse it off with warm water, or put it in the top shelf of your dishwasher and turn it on.To dry the tray, use a clean, dry dish rag.If you put it on the dish rack, the excess water will evaporate.The water tray should not be immersed in water.

Step 9: The water tank should be cleaned.

The water tank should be filled with half a gallon of water and a small amount of white vinegar.The cap should be replaced.The liquid should move around the inside of the tank to coat the walls.Wait 20 minutes after setting the tank down.To dry the inside, dump the liquid out and use a rag.To allow liquid to evaporate completely, air dry.

Step 10: Disinfect the water tank.

The water tank needs to be filled with bleach and water.Shake vigorously for 20 minutes when you replace the cap.If the smell of bleach is present, you should empty the water tank and refill it with clean water.Allow the air to dry and wipe the inside of the water tank.

Step 11: The water tray needs to be wiped down.

Wet a sponge or soft rag with a solution made of bleach and water.The water tray needs to be wiped down.Place it in the top shelf of your dishwasher or rinse it under the sink.The water tray needs to be dry.

Step 12: It is a good idea to wipe the outside of the humidifier.

To clean the base and outside of the cool mist humidifier, use a damp rag.If you put the base in the water, it will be damaged and you will risk injury the next time you turn on the device.