How to clean concrete and remove red clay stains.
Red clay is a leading type.After a heavy rain, the red clay stains are likely to show up in the concrete, stucco, or brick.
The act of walking on a concrete driveway with dirty shoes can cause damage to a home foundation.A power wash alone won't remove the red clay stains.It is difficult to remove red clay stains.The reddish color of the soil is due to the presence of iron oxide or rust in it.Iron oxide can be used in paints, coating, and colored concrete.You can learn how to remove red clay stains from concrete.
Red clay stains on concrete can be cleaned with a combination of chemical agent and mechanical force.Since the red clay is embedded in the concrete, an acidic based cleaning agent is more potent.
Be careful when choosing an acid cleaner.
Straight acids that are highly concentrated can burn or etch the concrete.It might not be possible for an acid cleaner to break the iron oxide bond on the concrete or masonry.If the type of ez_fad_position is 'undefined'.
Red clay stain removers are available at most home improvement stores.One that works by micro etching the concrete is a buffered one.The red clay doesn't affect the surface.Surfactants reduce the surface tension between liquids.Carefully read and follow the directions on the packaging and wear protective gear while using the product.
Power washing can help remove the red clay from the surface.When doing a power wash, use a hand pump spray and let it sit for 3-6 minutes and then rinse away.After cleaning, it is a good idea to apply a Sealer that will permanently penetrate the surface without altering the overall exterior.The red clay won't be absorbed into the concrete pores in the future.
A rust remover can effectively get rid of stains.oxalic acid is a bleach in rust removers.There are cleaning agents that contain oxalic acid.If a concrete cleaner is effective on red clay, make sure to check the label.
Make sure the concrete is wet.Leave the cleaner in place for a while after applying it.There are additional applications that might be needed.The pressure washer can also be used with the cleaner.
After the concrete is clean and dry, apply a few coats of penetrating concrete sealant.This helps prevent the entry of soil in the first place.
Red clay stains are not limited to the driveway.You can stain your carpet with red soil and leave a mark.The steps below will help you deal with this type of stain.
If Murphy's Oil Soap isn't available, you can mix a small amount of Borax with a cup of water.Lestoil and OxiClean have been proven to be effective in dealing with red clay stains.
There are several highly efficient concrete cleaners on the market.There are some recommended concrete cleaners.
Red clay stains on concrete can add an undesirable appeal to your house.If you know how to remove red clay stains from concrete, you can keep your driveway or pathway clean.
Michael René is an expert in stain removal.Read about him and the rest of the team here.