How to fit a bathroom sink and tap, and how to install a basin.
The bathroom pedestal sink is a great solution for saving space in small and large bathroom.The sinks are usually made of either china or cast iron.Cast iron sinks are more expensive, but will last longer.It is easier to get lustrous china sinks at home improvement centers.?
Do you need to repair the floor in your bathroom before you install a pedestal sink?If you remove an existing bathroom cabinet to make room for a new sink, you will face exposed flooring that may be unattractive and fail to match the surrounding floor.
A portion of the bathroom wall will be exposed if you remove an existing Vanity.Before you put your new sink in the bathroom, consider painting or refinishing the wall.
You lose a lot of storage space by removing a cabinet for a sink.If that is going to be a problem, install a wall-mounted cabinet over the sink.Many wall-mounted cabinets have mirrors that are attractive and reasonably priced.
You need to support the weight of the sink.To fit a support board flush with the studs, cut a section of the wall.Align the sink with the support board.
Place the basin and pedestal in the correct position.Make sure it's level from front to back and left to right.To mount the basin and pedestal on the wall, mark the spot where you adjusted it.
The center of the sink should be decided on.To make sure the height and alignment are correct, place the sink on top of the pedestal.Set the sink and pedestal aside so that the wall can be properly mounted.
If you need to drill floor holes, make sure to do so before you continue with your installation.Water and electrical lines can be dangerous.