How to install a hook on a hollow door is explained by DoItYourself.com.
When you can't anchor directly to a stud, there is no shortage of options for securing objects to the wall.It works great for medium and lightweight objects like picture frames.When you need to hang something heavier, the bolts are unbeatable.
If you need to mount something to a hollow core door, these solutions are not feasible.There isn't enough material to hold on to and that spot will inevitably fail, causing damage to your wall or doorA hollow wall anchor is your best bet.
When you tighten them, they expand and have an integrated flat washer with teeth to help spread the weight out a bit and bite directly into the material.They are suited for affixing things to thin material.
When installed correctly, these anchors are very capable.Things can go wrong without the right technique and tools.I will show you how to install hollow wall anchor in this guide.
Most of the tools you will need to install hollow wall anchors are already in your possession.I always recommend getting the best tools you can afford if you have to get new tools.When you consider possible damage or replacement costs, high-quality tools are often cheaper in the long run.
The location of the hollow wall anchor is the first step.Make sure everything is level by using your tape measure, then mark your spot with a pencil.
I am putting a small wall hook rack on the back of the closet door.I want it to be centered on the door so I will measure the total width, divide it in half, and make a mark with my pencil.
To mark the screw holes, I center the wall hook rack on that mark.I will drill my pilot holes here.
It is important that you get the right drill bit for the wall anchor.You can't use the wall anchor because it's too small.It will not be tight enough to work and the teeth won't bite into the surface properly.I use a 5/16′′ bit for my application.
I drill a hole on my previous marks to make sure it is not too deep.After I insert the anchor into the hole, I use my hammer to lightly tap it on the door.
It is important to not tighten the screw without something between it and the anchor.It will twist around and the teeth will eat into your wall if you do that.You can use another washer as a stop if you want to hang first.
I place the screws through my wall hook rack, line them up, and slowly tighten the screw until it becomes difficult to turn.The door will be locked in place when the anchor expands inside.Double check that everything is secure and you are ready to clean up.
Installation of hollow wall anchors is straightforward and they are an excellent solution for affixing objects to thin material.
In this guide, I showed you how to install hollow wall anchors manually, which is the most cost effective way to do it.An anchor setting tool is worth the investment if you want something quicker.These tools can be used to set the anchor in the wall.It's an excellent option from Silverline.