How To Make a nailpolish.

Right now, matt nail polish is a hot trend.They can look chic.They can be expensive and not everyone is ready to invest in a bottle of polish.If you don't have a matte top coat at home, what are you going to do?There are a few simple ways to turn ordinary nail polish into nailpolish.The article will show you how to make small amounts of polish.

Step 1: You need to gather your supplies.

You will have to work quickly if you want the polish to dry.Basecoat and nail polish, Baking powder, soft makeup brush, a small dish or container, and a tight-woven sifter are what you will need to have ready.

Step 2: The baking powder can be poured into a small bowl.

If clumps of powder are in your manicure, you will need to break them up.If you still see clumps, break them up with a toothpick.

Step 3: The nails need to be painted on one hand.

It's important to apply a basecoat first.Paint your nails with any nail polish you choose.The other hand should not be painted until the nail polish doesn't dry out too quickly.

Step 4: Put the baking powder on your nails.

Rub the brush over the wet nail polish after dipping it in the baking powder.The polish will stick to the powder.If you want to brush your nail with the brush, you need to dip it into the baking powder.The bristles will get caught in the wet polish if you don't do this.Make sure that the baking powder is evenly applied to your nails.There will be gaps if there are gaps in the powder.You should use a soft-bristled makeup brush.The manicure may be affected if the brush is too stiff.

Step 5: Take a few seconds to let it sit on your nails.

It will be enough time for a thin layer of baking powder to sink into the nail polish.

Step 6: You can wash the powder off of your nails.

It's important to remove any specks of powder.Your nails should be straight.If the powder is still in the polish, you can brush it off by dipping the brush into some water.The stuck powder should be removed with this.

Step 7: For your other hand, repeat the process.

Dust your nails with baking powder after applying a basecoat and nail polish.Use a clean brush to remove the powder.

Step 8: Let your nails dry.

It is a good idea to let your nail polish dry completely in order to see the final result.You might want to avoid using a top coat.The effect will be taken away by most topcoats.If you can find one with a matt finish, then use it.

Step 9: You need to gather your supplies.

If you plan on using a lot of nailpolish, make an entire bottle.You don't have to mix the ingredients every time.Here is a list of what you will need.

Step 10: You can choose between nail polish and powder.

Make sure the bottle you are using is not full.The powders you will be using will cause it to overflow if you use a full bottle.If you want to make a top coat, you will need clear nail polish.You can apply this over a manicure.If you want to make regular nail polish, you will need a solid colored polish.Clear nail polish is needed if you want to make a custom color.Makeup, skin-safe powder, and cosmetic powder are required.The finish will be even more stable with the addition of some cornstarch.

Step 11: Put your powder in a container.

It needs to be very fine if you choose to use it.There are clumps in the powder.You can pour it through a sifter into a container.If you are working with eyeshadow, you should first remove it from the pan and then smash it up with a pencil or brush.The powders should be fine and not have any clumps.You will only need a few pinches.If you are using eyeshadow, use an entire pan per bottle of polish.

Step 12: Make a funnel out of a piece of paper.

The paper should be rolled into a cone.Make sure the end has an opening for the powder to pass through.

Step 13: Put the nail polish bottle in the neck.

The end should not be touching the polish.If it is, make the point higher by widening the top of the cone.If the point gets wet, trim it down or the powder will get caught in it.

Step 14: You can add a few pinches of your powder.

You can use a tiny scoop.If it sticks to your skin, you may end up wasting some of the powder.If you add too much powder, you will make your polish too thick.It is possible to add more powder later.Adding a little bit of cornstarch or cornflour to your makeup will make it look better.If the powder is shimmery, it will make the polish even more matt.

Step 15: Add in two to three ball bearings.

If you are starting out with a clear nail polish base, this will make it easier to mix your polish.Most solid-colored polishes already have them inside, so if you are using a solid colored nail polish, you probably won't need them.Each mixing ball should have a diameter of less than 3 inches.The best mixing balls are made of steel.

Step 16: Take the bottle out and shake it.

Once the color is uniform, stop shaking.If you can't hear the balls rattling anymore, stop shaking.

Step 17: Make any necessary changes after testing your polish.

Once the polish is mixed, you can open the bottle and brush on some of it.Let the nail polish dry so that you can see what it looks like.Thin the polish with a drop or two of nail polish thinner.If the polish isn't perfect, add in some more ingredients.If you are using clear nail polish that is too sheer, you should add in more eyeshadow, mica powder, or pigment powder.

Step 18: Allow the nail polish to sit for 24 hours before using it.

This will make the polish more smooth and less clumpy.

Step 19: Be careful with what you use.

If you use a glossy topcoat on your manicure, it will take away the effect.If you can find one that matches your polish, try it.

Step 20: It can be difficult to find nail polish in the right color.

It is possible to turn clear nail polish into something else.If you just want a smooth finish, then you can use cornstarch.There is a list of what you will need.

Step 21: You can choose your eyeshadow.

You can use any color you want, but it has to be neutral.You can use a different type of powder.You won't have to crush the eyeshadow into a powder when you get this.If you want to make a clear top coat, use cornstarch.

Step 22: Use a toothpick to get some eyeshadow out of a container.

You can use a plastic cup, a small dish, or a cupcake liner.Your nails will be the same color as your eyeshadow.Plan on using more eyeshadow than nailpolish.

Step 23: Make sure you ground the eyeshadow into a powder.

Use the end of a brush or pencil to break the clumps.The eyeshadow needs to be crushed until it is powdery.Your manicure will look blurry if you have clumps in your eyeshadow.

Step 24: Adding some cornstarch to your polish will make it extra matt.

You will need to use the same amount of eyeshadow and cornstarch.The color is even if you mix the powders together with a toothpick.

Step 25: Add in a few drops of clear nail polish and stir with a toothpick.

When you get an even color and consistency, keep stirring.Add more eyeshadow if the color is too sheer.There should be no clumps in the polish.Break them up with a toothpick.They will show up on your manicure if you don't do this.

Step 26: The nail polish should be used quickly.

The polish will oxidize very quickly.Simply apply a basecoat and paint your nails.You can put extra polish into an empty nail polish bottle or a small glass bottle.

Step 27: Let the nail polish dry.

You won't see the full effect of the eyeshadow until it dries.Most topcoats are glossy and will reverse the matt effect.It's fine if you can find a matt top coat.

Step 28: You need to gather your supplies.

You will need to work quickly once you apply the nail polish.This method only works on nailpolish.It will be too late if you let the nail polish dry.Here's a list of things you'll need.

Step 29: Begin by boiling some water.

Put the pot or saucepan on the stove by filling it with water.The water should heat up when the stove is turned on.The steam will be used to make nail polish.

Step 30: Make sure your nails are clean.

It won't stick to nails that have oil on them.It's a good idea to wipe your nails down with a nail polish remover.

Step 31: You should start applying your basecoat.

If you plan on using a darker color of nail polish, the basecoat will protect your nails from getting stained.The basecoat will give the nail polish something to hold onto.

Step 32: The nailpolish should be applied.

If you want to apply a second coat, apply one thin coat and let it dry.If you apply a thick coat, the nail polish will form tiny bubbles or chip later on.

Step 33: Hold your wet nails over the water for a few seconds.

Make sure the steam hits the wet nail polish.Don't get the nails wet.If the nail polish is wet, it won't work.If you want to wiggle your fingers from time to time, be sure to move your hands.The steam will cover your nails.

Step 34: Go away from the pot.

The nail polish should be dry after a few seconds.You can leave the pot and let the nail polish dry on its own.

Step 35: Pick out your supplies.

If you don't like a particular color of nail polish, you can always use a top coat to make it look better.Basecoat Nail polish is what you'll need.

Step 36: If you aren't wearing nailpolish, wipe your nails down with nail polish remover.

Even the smallest amount of oil won't stick to nail polish.You can wipe down your nails with a cotton ball.

Step 37: Apply a base coat.

If you are going to use a darker nail polish color, this will protect your nails from getting stained.

Step 38: Apply two coats of nailpolish.

Allow each coat to dry before applying the next one.Solid colors look better than metallic, pearlescent, iridescent, or glittery ones.

Step 39: Make sure you are happy with the finish of your manicure.

All flaws, including streaks and evenness, can be brought out with a matt top coat.Make sure that your manicure is the way you want it to be, the matt top coat won't hide flaws like a glossy one might.

Step 40: A high-quality topcoat is what you should choose.

This will not work if the bottle says "matte" on it.It's important to keep in mind that some topcoats can change the color of your manicure.If the top coat looks foggy in the bottle, it will change the color of your manicure.

Step 41: Let it dry before applying the top coat.

Some topcoats can take a long time to dry.The nail polish may still be wet even if it looks dry.For the next hour or two, be careful with your nails.It's important to be aware that topcoats are more visual than protective.It is not always possible to protect your manicure against chipping.