How to Make Window Clings Stick Again is a three-step guide.

You have found the perfect cling to decorate your window.It's difficult to get it to stick to your window after buying it.An annoying situation?We understand.

We are here to help you say goodbye to a dull looking home and welcome a stylish one.

Start by cleaning the window where you put the cling.You should mark the area where you want to attach it.All you need to do is align the sticker and clean the window.

It is that simple.We are going to learn how you can stick window clings to your windows.

pinning aprons to stop them from tangling isn't as simple as sticking window clings.We have your back, so there is nothing to worry about.To find out how to properly stick window clings to walls and windows, follow these three simple steps.

A static window cling uses static electricity to stick to windows.The window won't stick if it's not clean.The dirt will be getting in your way when attaching them.

To clean your windows, take a brush.Don't forget to wear a mask if you are allergic to dust.

If there is still dust left, spray the window with a cleaner and it will make the area muddier.

After brushing off the dust, spray a chemical solution on the window.Then, use a piece of cloth to clean the window.It is better if you use a microfiber cloth.

Did you think a cleaning solution would be useful for attaching window clings?You will be surprised to know that cleaning solutions are used to remove melted plastic from roaster pans.

You are facing the problem of not having any cleaning solution at your home now that you have had your fair share of surprises.

The cleaning solution will help you clean the windows and make your window clings stick better.

You can make your own chemical solution by pouring 2 drops of dish soap into 1.5 cups of water.Next, add it to the mix.Pour the solution inside the bottle and it will be ready to use.Simple, huh?

If you think it is difficult to remove candle wax from the sink, you are in for a surprise.It is as much a hassle to re-stick the window cling.

If you want to avoid this problem, the next step is crucial.You can mark the exact spot where you will attach the cling by choosing the area.Don't forget to use a washable marker so you can clean off the marks later on.

After marking the area, align the window cling with the mark.Pressing the static window cling against the window will make it stick.

There will be bubbles inside the window clings if there are water droplets on the windows.The clings will not stick uniformly to the windows.

You will be surprised to know that even if the window is dry, moist air can cause bubbles and stop window clings from sticking to cold windows.This is where a squeegee will come to your rescue.

It's important to choose the right squeegee for this work.If you want to remove bubbles, then a square-shaped squeegee is your best ally.

All you have to do is press the window against the wall and use the squeegee to remove bubbles.Clean the areas where you marked before attaching the cling and you are done!

The window clings last around 6 months for indoor windows.There are window clings that can last for a few days.