How to Measure Toilet Rough-In Distance and how to measure it easily are some of the things you need to know.
If you want to buy or fix a new toilet, you need to measure the toilet rough in size.
The toilet rough in is the distance between the wall and the outlet pipe.Knowing the size of your toilet is important.
Having a toilet that fits your rough in is definitely imperative, as there are different sizes of toilets to choose from.
The standard toilet rough in size is 12 inches, and most toilets sold in the US fit that measurement.Older homes may have 10 or 14 inch rough ins.
The size of the toilet is the first thing to consider when installing a new one.Knowing the size of the toilet is important.
Before you buy a new toilet, you need to know the toilet rough in distance.
To find your toilet's rough-in, you'll need to measure from the wall behind the toilet to the middle of the closet bolts.
The standard rough-in dimensions are 10′′, 12′′, and 14′′.Take your measurement down to the nearest standard rough-in.Measure to the rear of the old toilet.
To estimate the wall of a new toilet, use a straight edge or sight down the back of the toilet.To find the middle of the bolt holes, measure from there.
The rough-in of your old toilet should be the same as your new one.There are items on top of the tank that can fall behind the toilet.Unless you change your plumbing or move the wall, a larger one won't fit.
The toilet rough in is the measurement from the wall of the bathroom to the bolt cap.The distance from the wall behind the toilet to the center of the outlet pipe is known as the rough in distance.
You can find toilets with rough in distances of 10 to 14 inches in older homes and corner toilets.
The toilet should be set at least 15 inches from the center of the flange to the wall frame.
There is a standard distance from the back wall to the wall framing.
Most codes require at least 15 inches from the center of the toilet to any side wall, obstruction or sanitary fixture.
The NKBA recommends 32 inches.There should be at least 24 inches of clear space in front of a toilet.
Replacing the toilet isn't the most glamorous do-it-yourself project.It isn't the hardest.Intermediate do-it-yourselfers are willing to replace a toilet.
You have to buy a new toilet before you can replace the old one.Before you go to the home store to buy a toilet, make sure you have a few measurements.This job is easy if you have a helpers.
The farthest spot from the wall is at the end of the bowl.The level should be held plumb by your helpers.
The bubble is plumb when it is in the center of the glass tube.The tank is in the way so you can't take the measurement on top of the bowl.
To measure from the wall to the level, use a tape measure.Measure above the seat if it's in the way.This is the length of your toilet.
The distance between the wall and the bolts that hold the toilet to the floor is an important measurement.The bolt caps should be measured from the wall to the center.
Add the thickness of the baseboard or shoe mold to the measurement.The measurement is rough.
The space available in the bathroom is an important factor to consider when installing a new toilet.The space behind the toilet needs to be enough for the tank to sit.
The rough opening is where you need to find out how much space is available.There is a rough opening between the center of the drain and the wall.
The end of the tape measure should be placed against the wall behind the existing toilet.