How To Prevent Your Phone Cable from Getting Twisted and Tangled
Is it possible that the cable that connects your phone to the phone on your desk gets twisted into a tangle?It has to be untangled every few weeks or days.The purpose of this article is to help you understand the cause of phone cable tangles.
Step 1: Hold the phone to your ear.
You should note which hand you are holding the phone with.This is the most dominant part of your body.For the rest of the article, it will be described as your "dominant side."
Step 2: The cord needs to be untangle.
Hopefully, this will be the last time you do it.Let the phone rest on your desk or on the floor if you unplugged the cord from it.Take the cord between your first two fingers.Pull the cord along, running your fingers down it as you pull through the tangles.
Step 3: Remove the phone from the cradle and plug it back in.
Step 4: You can use the phone on your dominant side by moving it to your desk.
Put the phone on the left side of your desk if it's the side you use to call.The tangles occur when the phone is twisted around and pulled in opposite directions.When you pick the phone up with one hand, switch to the other, and then hang up, it's most common.
Step 5: Purchase a phone cord cleaner.
There are devices that you can use to connect the phone cord to it.Rather than allowing the phone to tangle as you move it around, the detangler will spin or rotate in response to the energy built up.
Step 6: Remove the phone cord.
Let the phone rest on your desk or on the floor if you unplugged the cord from it.Take the cord between your first two fingers.Pull the cord with your fingers as you pull through the tangles.
Step 7: The phone cord should be untangled.
Plug the cord into the detangler and connect it to the phone.
Step 8: Take it out.
Give it a try.It should be able to respond to small amounts of pressure.You may want to try an alternate model if it doesn't work.