How to remove a Tub that is stuck?
Repairing plumbing issues around the house can be a lot of work, including the fixture at the bathroom.There is a tub spout that can get stuck and become frustrating, and that is the one that comes off easily.
Dealing with a stuck tub spout is hard for most people as it seems impossible to remove regardless of what we do.We can offer a couple of solutions that may be what you need to get the tub spout removed.
You will need a wrench pipe, towels, and a couple more tools for the next steps.
The first thing you will do is check the bottom part of your faucet.Whether or not there is a small hole at the end is what you are looking for.There is a retaining screw that keeps it attached to the water pipe if there is one.
We have to secure the area to avoid making a mess.Use a towel to cover the drain.The preventive measure will keep leaks at bay and keep unpleasant odors out of the air.
The water supply should be shut off if you cover the drain.The control valve can be turned to do that.You don't have to worry about anything else getting in the way when you start working on the tub spout removal.
Start working on the retaining screw after shutting off the water supply line.The way to do it is to turn the screw clockwise.Continue until the faucet comes loose.
If the tap doesn't want to come loose, twist it sideways and put more pressure on it.Make sure to apply enough force to get the tap out, but not so much that it will cause permanent damage to the surface.
There is a chance that the faucet won't come off after trying those methods.You can try the next method if that is the case.It may sound odd, but it could save you from having a tub spout that is seemingly impossible to remove.
As the temperature increases, you can turn on the hairdryer to heat the tap.You want to be cautious while working with electricity.Gloves will protect you from getting burnt by the hot faucet.
Wait until the temperature drops to a comfortable point and then pull the tap again.Use the tools we tried before.If the method worked out for you, you should grab the tap and take the tub spout away from the plumbing.
Don't worry, you can find the retaining screw.There is still a way to use a clean towel and a pipe wrench.
Wrap the towel around the faucet.It will protect the next thing, which is the pipe wrench on the faucet.
After securing and holding a firm grip, turn the wrench and faucet clockwise.The fixture should be removed from the water pipe.
It would be best if we had a better idea of how the tub spout works.We can tell the tub spout type by looking at their installation method.
If the spout slides over the tub's pipe at a 1/2 inch distance, it is a slip-on spout.There are screws at the bottom of the attachment.
It is easy to understand the difference between the two if you take a closer look.It is a slip-on spout if you notice screws at the backside.One of the screw-on spouts types is if there are no screws connecting the spout.
Knowing what type of tub spout you have is important to follow through with the removing process.
The two described above are the most common tub spouts.If you have doubts about how each one works and what it would take to remove them as long as they don't get stuck, check with the manufacturer.
Even though it may be tempting to give up, you should keep trying new methods to remove that stuck tub spout.A list of steps that you can follow to get the job done and move on with the plumbing projects you want to finish was covered in our article.
Everyone should be able to remove a stuck tub spout with the right tools.If it becomes too much for you to handle, consider getting help from a professional, as they may be able to provide information that could have escaped our attention.
There are many tub spouts types out there, which means that each one may work differently.The removing process we follow may or may not work out for you, so it is a good idea to consult the manufacturer or a third party.